AccScience Publishing / IJB / Volume 9 / Issue 5 / DOI: 10.18063/ijb.758
Cite this article
Journal Browser
Volume | Year
News and Announcements
View All

Understanding droplet jetting on varying substrate for biological applications

Jia Min Lee1* Xi Huang1 Guo Liang Goh2 Tuan Tran1,2 Wai Yee Yeong1,2
Show Less
1 HP-NTU Digital Manufacturing Corp Lab, School of Mechanical & Aerospace Engineering, Nanyang Technological University, Singapore
2 Singapore Centre for 3D Printing, School of Mechanical & Aerospace Engineering, Nanyang Technological University, Singapore
Submitted: 22 November 2022 | Accepted: 4 January 2023 | Published: 23 May 2023
(This article belongs to the Special Issue Related to 3D printing technology and materials)
© 2023 by the Author(s). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International License ( )
Inkjet printing
Material jetting
Additive manufacturing
Functional material

Mir TA, Iwanaga S, Kurooka T, et al., 2019, Biofabrication offers future hope for tackling various obstacles and challenges in tissue engineering and regenerative medicine: A perspective. Int J Bioprint, 5(1):153–163.


Liu F, et al., 2018, Progress in organ 3D bioprinting. Int J Bioprint, 4(1):128–142.

Ng WL, Yeong WY, 2019, The future of skin toxicology testing—Three-dimensional bioprinting meets microfluidics. Int J Bioprint, 5(2.1):237.

Jang T-S, Jung H-D, Pan MH, et al., 2018, 3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering. Int J Bioprint, 4(1):126–153.

Lee JM, Yeong WY, 2018, Data processing for multi-material 3d bioprinting, in C.K. Chua, W.Y. Yeong, M.J. et al., Eds., in Proceedings of the 3rd International Conference on Progress in Additive Manufacturing, 164–169, https// [Online]. Available: ://WOS:000485804300026

Ng WL, Chan A, Ong YS, et al., 2020, Deep learning for fabrication and maturation of 3D bioprinted tissues and organs. Virtual Phys Prototyp. https//

Ng WL, Lee JM, Zhou M, et al., 2020, Hydrogels for 3-D bioprinting-based tissue engineering, in Rapid Prototyping of Biomaterials, R. Narayan Ed. Chapel Hill, NC: Elsevier, 183–204.

Gardan J, 2019, Smart materials in additive manufacturing: State of the art and trends. Virtual Phys Prototyp, 14(1):1–18.

Lee JM, Sing SL, Zhou M, et al., 2018, 3D bioprinting processes: A perspective on classification and terminology. Int J Bioprint, 4(2):151. https//

Ahn S, Lee H, Kim G, 2013, Functional cell-laden alginate scaffolds consisting of core/shell struts for tissue regeneration. Carbohydr Polym, 98(1):936–942. https//

Billiet T, Gevaert E, De Schryver T, et al., 2014, The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. Biomaterials, 35(1):49–62. https//

Duan B, Hockaday LA, Kang KH, et al., 2013, 3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels. J Biomed Mater Res Part A, 101(5):1255–1264. https//

Fedorovich NE, Wijnberg HM, Dhert WJ, et al., 2011, Distinct tissue formation by heterogeneous printing of osteo- and endothelial progenitor cells. Tissue Eng Part A, 17(15–16):2113–2121. https//

Huang Y, He K, Wang X, 2013, Rapid prototyping of a hybrid hierarchical polyurethane-cell/hydrogel construct for regenerative medicine. Mater Sci Eng C, 33(6):3220–3229. https//

Lee H, Ahn S, Bonassar LJ, et al., 2013, Cell-laden poly(varepsilon-caprolactone)/alginate hybrid scaffolds fabricated by an aerosol cross-linking process for obtaining homogeneous cell distribution: Fabrication, seeding efficiency, and cell proliferation and distribution. Tissue Eng Part C Methods, 19(10):784–793. https//


Ozbolat IT, Chen H, Yu Y, 2014, Development of ‘Multi-arm Bioprinter’ for hybrid biofabrication of tissue engineering constructs. Robot Comput Integr Manuf, 30(3):295–304. https//

Shim J-H, Lee J-S, Kim JY, et al., 2012, Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system. J Micromech Microeng, 22(8):085014. https//

Snyder JE, Hamid Q, Wang C, et al., 2011, Bioprinting cell-laden matrigel for radioprotection study of liver by pro-drug conversion in a dual-tissue microfluidic chip. Biofabrication, 3(3):034112. https//

Wang X, Yan Y, Pan Y, et al., 2006, Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system (in English). Tissue Eng, 12(1):83–90. https// 10.1089/ten.2006.12.83

Zhuang P, Ng WL, An J, et al., 2019, Layer-by-layer ultraviolet assisted extrusion-based (UAE) bioprinting of hydrogel constructs with high aspect ratio for soft tissue engineering applications. PLoS One, 14(6):e0216776. https//

Lee JM, Yeong WY, 2020, Engineering macroscale cell alignment through coordinated toolpath design using support-assisted 3D bioprinting. J R Soc Interface, 17(168):20200294. https//

Skardal A, Zhang J, Prestwich GD, 2010, Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates. Biomaterials, 31(24):6173–6181. https//

Visser J, Peters B, Burger TJ, et al., 2013, Biofabrication of multi-material anatomically shaped tissue constructs. Biofabrication, 5(3):035007. https//

Ng WL, Yeong WY, Naing MW, 2016, Microvalve bioprinting of cellular droplets with high resolution and consistency. Proceedings of the International Conference on Progress in Additive Manufacturing. 397–402. https//

Ng WL, Lee JM, Yeong WY, et al., 2017, Microvalve-based bioprinting—Process, bio-inks and applications. Biomater Sci, 5(4):632–647.

Masaeli E, Forster V, Picaud S, et al., 2020, Tissue engineering of retina through high resolution 3-dimensional inkjet bioprinting. Biofabrication, 12(2): Art no. 025006. https//

Solis LH, Ayala Y, Portillo S, et al., 2019, Thermal inkjet bioprinting triggers the activation of the VEGF pathway in human microvascular endothelial cells in vitro. Biofabrication, 11(4): Art no. 045005. https//

Angelopoulos I, Allenby MC, Lim M, et al., 2020, Engineering inkjet bioprinting processes toward translational therapies. Biotechnol Bioeng, 117(1):272–284. https//

Wu DZ, Xu CX, 2018, Predictive modeling of droplet formation processes in inkjet-based bioprinting. J Manuf Sci Eng Transact Asme, 140(10): Art no. 101007. https//

Guillemot F, Guillotin B, Fontaine A, et al., 2011, Laser-assisted bioprinting to deal with tissue complexity in regenerative medicine (in English). Mrs Bull, 36(12): 1015–1019. https// 10.1557/Mrs.2011.272

Guillotin B, Souquet A, Catros S, et al., 2010, Laser assisted bioprinting of engineered tissue with high cell density and microscale organization. Biomaterials, 31(28):7250–7256.


Gruene M, Deiwick A, Koch L, et al., 2011, Laser printing of stem cells for biofabrication of scaffold-free autologous grafts. Tissue Eng Part C Methods, 17(1):79–87. https//

Guillemot F, Souquet A, Catros S, et al., 2010, High-throughput laser printing of cells and biomaterials for tissue engineering. Acta Biomater, 6(7):2494–2500.

Ng WL, Lee JM, Zhou M, et al., 2020, Vat polymerization-based bioprinting–process, materials, applications and regulatory challenges. Biofabrication, 12(2):022001.

Soman P, Chung H, Zhang AP, et al., 2013, Digital microfabrication of user-defined 3D microstructures in cell-laden hydrogels (in English). Biotechnol Bioeng, 110(11):3038–3047. https// 10.1002/Bit.24957

Zhu W, Qu X, Zhu J, et al., 2017, Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture. Biomaterials, 124:106–115.

Gauvin R, Chen YC, Lee JW, et al., 2012, Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography. Biomaterials, 33(15): 3824–3834.

Wang Z, Kumar H, Tian Z, et al., 2018, Visible light photoinitiation of cell-adhesive gelatin methacryloyl hydrogels for stereolithography 3D bioprinting. ACS Appl Mater Interfaces, 10(32):26859–26869. https//

Mahdavi SS, Abdekhodaie MJ, Kumar H, et al., 2020, Stereolithography 3D bioprinting method for fabrication of human corneal stroma equivalent. Ann Biomed Eng, 48(7):1955–1970. https//

Mao Q, Wang Y, Li Y, et al., 2020, Fabrication of liver microtissue with liver decellularized extracellular matrix (dECM) bioink by digital light processing (DLP) bioprinting. Mater Sci Eng C Mater Biol Appl, 109: Art no. 110625. https//

Gudupati H, Dey M, Ozbolat I, 2016, A comprehensive review on droplet-based bioprinting: Past, present and future. Biomaterials, 102:20–42.

Li X, Liu B, Pei B, et al., 2020, Inkjet bioprinting of biomaterials. Chem Rev, 120(19):10793–10833. https//

Liu Y, Derby B, 2019, Experimental study of the parameters for stable drop-on-demand inkjet performance. Phys Fluids, 31(3):032004. https//

Yan J, Huang Y, Xu C, et al., 2012, Effects of fluid properties and laser fluence on jet formation during laser direct writing of glycerol solution. J Appl Phys, 112(8):083105. https//

Kang SH, Kim S, Lim JW, et al., 2020, Study on fall velocity of continuously ejected micro inkjet droplet. J Mech Sci Technol, 34(8):3311–3315. https//

Xu C, Zhang Z, Fu J, et al., 2017, Study of pinch-off locations during drop-on-demand inkjet printing of viscoelastic alginate solutions. Langmuir, 33(20):5037–5045. https//

Poole R, 2012, The deborah and weissenberg numbers. Rheol Bull, 53(2):32–39.

Vadillo DC, Tuladhar TR, Mulji AC, et al., 2010, Evaluation of the inkjet fluid’s performance using the “Cambridge Trimaster” filament stretch and break-up device. J Rheol, 54(2):261–282. https//

Modak CD, Kumar A, Tripathy A, et al., 2020, Drop impact printing. Nat Commun, 11(1):4327. https//

Meyer JD, Bazilevsky AV, Rozhkov AN, 1997, Effects of Polymeric Additives on Thermal Ink Jets, Seattle, WA.

Morrison NF, Harlen OG, 2010, Viscoelasticity in inkjet printing. Rheol Acta, 49(6):619–632. https//

Suly P, Sevcik J, Dmonte DJ, et al., 2021, Inkjet printability assessment of weakly viscoelastic fluid: A semidilute polyvinylpyrrolidone solution ink case study. Langmuir, 37(28):8557–8568. https//

Du Z, Lin Y, Xing R, et al., 2018, Controlling the polymer ink’s rheological properties and viscoelasticity to suppress satellite droplets. Polymer, 138:75–82.

Jang D, Kim D, Moon J, 2009, Influence of fluid physical properties on ink-jet printability. Langmuir, 25(5):2629– 2635. https//

Blaeser A, Campos DFD, Puster U, et al., 2016, Controlling shear stress in 3D bioprinting is a key factor to balance printing resolution and stem cell integrity. Adv Healthc Mater, 5(3):326–333. https//

Krizek J, Delrot P, Moser C, 2020, Repetitive regime of highly focused liquid microjets for needle-free injection. Sci Rep, 10(1):5067. https//

Kiyama A, Mansoor MM, Speirs NB, et al., 2019, Gelatine cavity dynamics of high-speed sphere impact. J Fluid Mech, 880:707–722. https//


Park JA, Yoon S, Kwon J, et al., 2017, Freeform micropatterning of living cells into cell culture medium using direct inkjet printing. Sci Rep, 7(1):14610. https//

Chen L, Bonaccurso E, Deng P, et al., 2016, Droplet impact on soft viscoelastic surfaces. Phys Rev E, 94(6):063117. https//

Ng WL, Huang X, Shkolnikov V, et al., 2021, Controlling droplet impact velocity and droplet volume: Key factors to achieving high cell viability in sub-nanoliter droplet-based bioprinting. Int J Bioprint, 8(1). https//

Andreotti B, Snoeijer JH, 2020, Statics and dynamics of soft wetting. Ann Rev Fluid Mech, 52(1):285–308. https//

Aljedaani AB, Wang C, Jetly A, et al., 2018, Experiments on the breakup of drop-impact crowns by Marangoni holes. J Fluid Mech, 844:162–186. https//

Han X, Li J, Tang X, et al., 2022, Droplet bouncing: Fundamentals, regulations, and applications. Small, 18(22):2200277.

Rein M, 1993, Phenomena of liquid drop impact on solid and liquid surfaces. Fluid Dynamics Res, 12(2):61–93.

Rodriguez F, Mesler R, 1985, Some drops don’t splash. J Colloid Interface Sci, 106(2):347–352.

Blanchette F, Bigioni TP, 2006, Partial coalescence of drops at liquid interfaces. Nat Phys, 2(4):254–257.

Rodriguez F, Mesler R, 1988, The penetration of drop-formed vortex rings into pools of liquid. J Colloid Interface Sci, 121(1):121–129.

Oguz HN, Prosperetti A, 1990, Bubble entrainment by the impact of drops on liquid surfaces. J Fluid Mech, 219: 143–179. https//

Ray B, Biswas G, Sharma A, 2015, Regimes during liquid drop impact on a liquid pool. J Fluid Mech, 768:492–523. https//

Tran T, de Maleprade H, Sun C, et al., 2013, Air entrainment during impact of droplets on liquid surfaces. J Fluid Mech, 726:R3, Art no. R3. https//

Gielen MV, Sleutel P, Benschop J, et al., 2017, Oblique drop impact onto a deep liquid pool. Phys Rev Fluids, 2(8):083602. https//

Lee JM, Yeong WY, 2016, Design and printing strategies in 3D bioprinting of cell‐hydrogels: A review. Adv Healthc Mater, 5(22):2856–2865.

Soetedjo AA, Lee JM, Lau HH, et al., 2021, Tissue engineering and 3D printing of bioartificial pancreas for regenerative medicine in diabetes. Trends Endocrinol Metab, 32(8):609–622.

Mandal A, Clegg JR, Anselmo AC, et al., 2020, Hydrogels in the clinic (in English). Bioeng Transl Med, 5(2):e10158– e10158. https//

Salg GA, Giese NA, Schenk M, et al., 2019, The emerging field of pancreatic tissue engineering: A systematic review and evidence map of scaffold materials and scaffolding techniques for insulin-secreting cells. J Tissue Eng, 10:2041731419884708.

Dang TT, Nikkhah M, Memic A, et al., 2014, Chapter 19—Polymeric biomaterials for implantable prostheses, in Natural and Synthetic Biomedical Polymers, SG Kumbar, CT Laurencin, M Deng, Eds. Oxford: Elsevier, 309–331.

Wang S, Lee JM, Yeong WY, 2015, Smart hydrogels for 3D bioprinting. Int J Bioprint, 1(1):12. https//


Nele V, Wojciechowski JP, Armstrong JPK, et al., 2020, Tailoring gelation mechanisms for advanced hydrogel applications. Adv Funct Mater, 30(42):2002759.

Boulogne F, Ingremeau F, Limat L, et al., 2016, Tuning the receding contact angle on hydrogels by addition of particles. Langmuir, 32(22):5573–5579. https//

Kajiya T, Daerr A, Narita T, et al., 2011, Dynamics of the contact line in wetting and diffusing processes of water droplets on hydrogel (PAMPS–PAAM) substrates. Soft Matter, 7(24):11425–11432.

Veysset D, Kooi SE, Мaznev AA, et al., 2018, High-velocity micro-particle impact on gelatin and synthetic hydrogel. J Mech Behav Biomed Mater, 86:71–76.

Mrozek RA, Leighliter B, Gold CS, et al., 2015, The relationship between mechanical properties and ballistic penetration depth in a viscoelastic gel. J Mech Behav Biomed Mater, 44:109–120.

Baxter J, Mitragotri S, 2005, Jet-induced skin puncture and its impact on needle-free jet injections: Experimental studies and a predictive model. J Controll Release, 106(3):361–373.

Schoppink J, Fernandez Rivas D, 2022, Jet injectors: Perspectives for small volume delivery with lasers. Adv Drug Deliv Rev, 182:114109.

Park M-a, Jang H-j, Sirotkin FV, et al., 2012, Er:YAG laser pulse for small-dose splashback-free microjet transdermal drug delivery. Opt Lett, 37(18):3894–3896. https//

Berrospe-Rodriguez C, Visser CW, Schlautmann S, et al., 2016, Continuous-wave laser generated jets for needle free applications. Biomicrofluidics, 10(1):014104. https//

Cu K, Bansal R, Mitragotri S, et al., 2020, Delivery strategies for skin: Comparison of nanoliter jets, needles and topical solutions. Ann Biomed Eng, 48(7):2028–2039. https//

Zhao D, Zhou H, Wang Y, et al., 2021, Drop-on-demand (DOD) inkjet dynamics of printing viscoelastic conductive ink. Addit Manuf, 48:102451.

Wijshoff H, 2018, Drop dynamics in the inkjet printing process. Curr Opin Colloid Interface Sci, 36:20–27.

Josserand C, Thoroddsen ST, 2016, Drop impact on a solid surface. Annu Rev Fluid Mech, 48:365–391.

Stanton DW, Rutland CJ, 1998, Multi-dimensional modeling of thin liquid films and spray-wall interactions resulting from impinging sprays. Int J Heat Mass Transf, 41(20): 3037–3054.

Laan N, de Bruin KG, Bartolo D, et al., 2014, Maximum diameter of impacting liquid droplets. Phys Rev Appl, 2(4):044018. https//

Yarin AL, 2006, Drop impact dynamics: Splashing, spreading, receding, bouncing…. Annu Rev Fluid Mech, 38:159–192.

Alizadeh A, Bahadur V, Shang W, et al., 2013, Influence of substrate elasticity on droplet impact dynamics. Langmuir, 29(14):4520–4524. https//

Park SJ, Weon BM, Lee JS, et al., 2014, Visualization of asymmetric wetting ridges on soft solids with X-ray microscopy. Nat Commun, 5(1):4369. https//

Tirella A, Vozzi F, De Maria C, et al., 2011, Substrate stiffness influences high resolution printing of living cells with an ink-jet system. J Biosci Bioeng, 112(1):79–85.


Moreira ALN, Moita AS, Panão MR, 2010, Advances and challenges in explaining fuel spray impingement: How much of single droplet impact research is useful? Progr Energy Combust Sci, 36(5):554–580.


Stow CD, Hadfield MG, 1981, An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface. Proc R Soc Lond A Math Phys Sci, 373(1755):419–441.

Cossali GE, Coghe A, Marengo M, 1997, The impact of a single drop on a wetted solid surface. Exp Fluids, 22(6): 463–472. https//

Mundo C, Sommerfeld M, Tropea C, 1998, On the modeling of liquid sprays impinging on surfaces. Atom Sprays, 8(6): 625–652.

Mundo C, Sommerfeld M, Tropea C, 1995, Droplet-wall collisions: Experimental studies of the deformation and breakup process. Int J Multiphase Flow, 21(2):151–173.

Wal RLV, Berger GM, Mozes SD, 2006, The splash/non-splash boundary upon a dry surface and thin fluid film. Exp Fluids, 40(1):53–59. https//

Nooranidoost M, Izbassarov D, Tasoglu S, et al., 2019, A computational study of droplet-based bioprinting: Effects of viscoelasticity. Phys Fluids, 31(8):081901. https//

Goh GL, Saengchairat N, Agarwala S, et al., 2019, Sessile droplets containing carbon nanotubes: A study of evaporation dynamics and CNT alignment for printed electronics. Nanoscale, 11(22):10603–10614.


Nguyen TA, Nguyen AV, Hampton MA, et al., 2012, Theoretical and experimental analysis of droplet evaporation on solid surfaces. Chem Eng Sci, 69(1):522–529.

Shanahan M, Sefiane K, Moffat J, 2011, Dependence of volatile droplet lifetime on the hydrophobicity of the substrate. Langmuir, 27(8):4572–4577.

Duursma G, Sefiane K, David S, 2010, Advancing and receding contact lines on patterned structured surfaces. Chem Eng Res Design, 88(5-6):737–743.

Sefiane K, Wilson S, David S, et al., 2009, On the effect of the atmosphere on the evaporation of sessile droplets of water. Phys Fluids, 21(6):062101.

Nguyen PQM, Yeo L-P, Lok B-K, et al., 2014, Patterned surface with controllable wettability for inkjet printing of flexible printed electronics. ACS Appl Mater Interfaces, 6(6):4011–4016. https//

Lee JM, Yeong WY, 2015, A preliminary model of time-pressure dispensing system for bioprinting based on printing and material parameters. Virtual Phys Prototyp, 10(1): 3–8. https//

Pack M, Hu H, Kim D-O, et al., 2015, Colloidal drop deposition on porous substrates: Competition among particle motion, evaporation, and infiltration. Langmuir, 31(29):7953–7961.

Dou R, Derby B, 2012, Formation of coffee stains on porous surfaces. Langmuir, 28(12):5331–5338.

Zhang B, Lei Q, Wang Z, et al., 2016, Droplets can rebound toward both directions on textured surfaces with a wettability gradient. Langmuir, 32(1):346–351.

Zhao J, Chen S, Liu Y, 2017, Dynamical behaviors of droplet impingement and spreading on chemically heterogeneous surfaces. Appl Surf Sci, 400:515–523.

Clavijo CE, Crockett J, Maynes D, 2017, Hydrodynamics of droplet impingement on hot surfaces of varying wettability. Int J Heat Mass Transf, 108:1714–1726.

Li H, Li A, Zhao Z, et al., 2020, Heterogeneous wettability surfaces: Principle, construction, and applications. Small Struct, 1(2):2000028.

Lim C, Lam Y, 2014, An investigation into a micro-sized droplet impinging on a surface with sharp wettability contrast. J Phys D Appl Phys, 47(42):425305.

Yuan Z, Matsumoto M, Kurose R, 2020, Directional migration of an impinging droplet on a surface with wettability difference. Phys Rev Fluids, 5(11):113605.

Farshchian B, Pierce J, Beheshti MS, et al., 2018, Droplet impinging behavior on surfaces with wettability contrasts. Microelectron Eng, 195:50–56.

Lee JM, Sing SL, Yeong WY, 2020, Bioprinting of multimaterials with computer-aided design/computer-aided manufacturing (in English). Int J Bioprint, 6(1):245. https//

AlZaid S, Hammad N, Albalawi HI, et al., 2022, Advanced software development of 2D and 3D model visualization for TwinPrint, a dual-arm 3D bioprinting system for multi-material printing. Mater Sci Addit Manuf, 1(3):19–25. https//

Wang D, Ker DF, Ng KW, et al., 2021, Combinatorial mechanical gradation and growth factor biopatterning strategy for spatially controlled bone-tendon-like cell differentiation and tissue formation. NPG Asia Mater, 13(1):26. https//

Ferrara V, Zito G, Arrabito G, et al., 2020, Aqueous processed biopolymer interfaces for single-cell microarrays. ACS Biomater Sci Eng, 6(5):3174–3186. https//


Negro A, Cherbuin T, Lutolf MP, 2018, 3D inkjet printing of complex, cell-laden hydrogel structures. Sci Rep, 8(1):17099. https//

Phillippi JA, Miller E, Weiss L, et al., 2008, Microenvironments engineered by inkjet bioprinting spatially direct adult stem cells toward muscle- and bone-like subpopulations. Stem Cells, 26(1):127–134.

Engler AJ, Sen S, Sweeney HL, et al., 2006, Matrix elasticity directs stem cell lineage specification. Cell, 126(4): 677–689.

Dongre A, Weinberg RA, 2019, New insights into the mechanisms of epithelial–mesenchymal transition and implications for cancer. Nat Rev Mol Cell Biol, 20(2): 69–84. https//


Mihalko EP, Brown AC, 2018, Material strategies for modulating epithelial to mesenchymal transitions. ACS Biomater Sci Eng, 4(4):1149–1161. https//

Arai K, Iwanaga S, Toda H, et al., 2011, Three-dimensional inkjet biofabrication based on designed images. Biofabrication, 3(3):034113.

Yoon S, Park JA, Lee H-R, et al., 2018, Inkjet–spray hybrid printing for 3D freeform fabrication of multilayered hydrogel structures. Adv Healthc Mater, 7(14):1800050.

Xu T, Zhao W, Zhu J-M, et al., 2013, Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology. Biomaterials, 34(1):130–139.

Agarwala S, Lee JM, Ng WL, et al., 2018, A novel 3D bioprinted flexible and biocompatible hydrogel bioelectronic platform. Biosens Bioelectron, 102:365–371.


Lee JM, Sing SL, Zhou M, et al., 2018, 3D bioprinting processes: A perspective on classification and terminology (in English). Int J Bioprint, 4(2):151. https//

Lee H-R, Park JA, Kim S, et al., 2021, 3D microextrusion-inkjet hybrid printing of structured human skin equivalents. Bioprinting, 22:e00143.

Back to top
International Journal of Bioprinting, Electronic ISSN: 2424-8002 Print ISSN: 2424-7723, Published by AccScience Publishing