AccScience Publishing / IJB / Volume 10 / Issue 6 / DOI: 10.36922/ijb.4645
Submit to IJB
Cite this article
51
Download
629
Views
Journal Browser
Volume | Year
Issue
Search
Forthcoming Issue
Current Issue
View All
News and Announcements
View All
RESEARCH ARTICLE

Design, fabrication, and biocompatibility of 3D-printed poly(LLA-ran-PDO-ran-GA)/poly (D-lactide) composite scaffolds for bone tissue engineering

Tiantang Fan1 ,  Xiao Meng5 ,  Ruishen Zhuge3 ,  Jinwen Qin4 ,  Yutong Wang1 ,  Chunyu Zhang1 ,  Yiqiao Yin1 ,  Jianru Liu3* ,  Tianyun Fan2* ,  Dongya Liu1*
Show Less
1 College of Medical Engineering and the Key Laboratory for Medical Functional Nanomaterials, Jining Medical University, Jining, Shandong, China
2 Dongguan Maternal and Child Health Care Hospital, Postdoctoral Innovation Practice Base of Southern Medical University, Dongguan, Guangdong, China
3 Peking University School and Hospital of Stomatology & National Center for Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Research Center of Oral Biomaterials and Digital Medical Devices, Beijing, China
4 The Institute for Translational Nanomedicine, Shanghai East Hospital, the Institute for Biomedical Engineering & Nano Science, Tongji University School of Medicine, Shanghai, China
5 School of Energy, Power, and Mechanical Engineering, North China Electric Power University, Beijing, China
IJB 2024, 10(6), 4645 https://doi.org/10.36922/ijb.4645
Submitted: 23 August 2024 | Accepted: 8 October 2024 | Published: 8 October 2024
© 2024 by the Author(s). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International License ( https://creativecommons.org/licenses/by/4.0/ )
Download PDF
Cite
XML
Abstract

The long-term nonunion of bone defects remains a significant challenge in the field of orthopedics. Poly(L-lactic acid) (PLLA), widely used in bone tissue engineering, offers hope for addressing this issue. In our previous study, we aimed to enhance the poor toughness and slow degradation of PLLA by introducing flexible p-dioxanone (PDO) and highly reactive glycolic acid units into the molecular chain of PLLA to prepare PLLA-ran-PDO-ran-GA (PLPG) scaffolds, effectively mitigating the limitations of PLLA. However, the crystallization capacity of PLPG copolymers was weakened, resulting in insufficient mechanical properties. Therefore, in this study, poly(D-lactic acid) (PDLA) was introduced into PLPG via solution blending to enhance its crystallization properties through the in situ generation of stereocomplex poly(lactic acid) (SC-PLA). Subsequently, PLPG/PDLA scaffolds were prepared using 3D printing technology. The results demonstrated that PLPG/PDLA composites exhibited good machinability, while the scaffolds exhibited satisfactory mechanical and degradation properties. Additionally, cell experiments indicated that PLPG/PDLA scaffolds are biocompatible, supporting cell growth and proliferation on their surfaces. We believe that PLPG/PDLA scaffolds have significant potential for application in bone tissue engineering, effectively addressing the issue of long-term non-healing bone defects.

Graphical abstract
Keywords
3D bioprinting
Poly(L-lactide acid)
Poly(D-lactide acid)
Scaffolds
Tissue engineering
Funding
This work was supported by the Research Fund for Academician Lin He New Medicine, Natural Science Foundation of Shandong Province (no. ZR2021QC205), and the National Natural Science Foundation of China- Young Scientists Fund (No. 81600867).
Conflict of interest
The authors declare that they have no competing interests.
References
  1. Chen Y, Huang J, Liu J, et al. Tuning filament composition and microstructure of 3D-printed bioceramic scaffolds facilitate bone defect regeneration and repair. Regen Biomater. 2021;8:rbab007. doi: 10.1093/rb/rbab007
  2. Wei S, Ma J, Xu L, et al. Biodegradable materials for bone defect repair. Military Med Res. 2020;7:1-25. doi: 10.1186/s40779-020-00280-6
  3. Xu L, Ma F, Leung FK, et al. Chitosan-strontium chondroitin sulfate scaffolds for reconstruction of bone defects in aged rats. Carbohyd Polym. 2021;273:118532. doi: 10.1016/j.carbpol.2021.118532
  4. Cendrero AM, Martínez FF, Requejo WGS, et al. Open-source library of tissue engineering scaffolds. Mater Design. 2022;223:111154. doi: 10.1016/j.matdes.2022.111154
  5. Wang C, Huang W, Zhou Y, et al. 3D printing of bone tissue engineering scaffolds. Bioact Mater. 2020;5:82-91. doi: 10.1016/j.bioactmat.2020.01.004
  6. Asghari F, Faradonbeh DR, Malekshahi ZV, et al. Hybrid PCL/chitosan-PEO nanofibrous scaffolds incorporated with A. euchroma extract for skin tissue engineering application. Carbohyd Polym. 2022;278:118926. doi: 10.1016/j.carbpol.2021.118926
  7. Kuang T, Chen F, Chang L, et al. Facile preparation of open-cellular porous poly (l-lactic acid) scaffold by supercritical carbon dioxide foaming for potential tissue engineering applications. Chem Eng J. 2017;307:1017-1025. doi: 10.1016/j.cej.2016.09.023
  8. Bertsch C, Maréchal H, Gribova V, et al. Biomimetic bilayered scaffolds for tissue engineering: from current design strategies to medical applications. Adv Healthc Mater. 2023;12:2203115. doi: 10.1002/adhm.202203115
  9. Nigmatullin R, Taylor CS, Basnett P, et al. Medium chain length polyhydroxyalkanoates as potential matrix materials for peripheral nerve regeneration. Regen Biomater. 2023;10:rbad063. doi: 10.1093/rb/rbad063
  10. Duan R, Wang Y, Su D, et al. The effect of blending poly(l-lactic acid) on in vivo performance of 3D-printed poly(l-lactide-co-caprolactone)/PLLA scaffolds. Biomater Adv. 2022;138:212948. doi: 10.1016/j.bioadv.2022.212948
  11. Zheng S, Li W, Chen Y, et al. Synergistic effect of stereo-complexation and interfacial compatibility in ammonium polyphosphate grafted polylactic acid fibers for simultaneously improved toughness and flame retardancy. Int J Biol Macromol. 2024;261(Pt 2):129943. doi: 10.1016/j.ijbiomac.2024.129943
  12. Yang Y, Zan J, Yang W, et al. Metal organic frameworks as a compatible reinforcement in a biopolymer bone scaffold. Mater Chem Front. 2020;4:973-984. doi: 10.1039/C9QM00772E
  13. Fan T, Qin J, Li J, et al. Fabrication and evaluation of 3D printed poly(l-lactide) copolymer scaffolds for bone tissue engineering. Int J Biol Macromol. 2023;245:125525. doi: 10.1016/j.ijbiomac.2023.125525
  14. Liu H, Bai D, Bai H, et al. Constructing stereocomplex structures at the interface for remarkably accelerating matrix crystallization and enhancing the mechanical properties of poly(L-lactide)/multi-walled carbon nanotube nanocomposites. J Mater Chem A. 2015;3:13835-13847. doi: 10.1039/c5ta02017d
  15. Cheng Y, Jiao Z, Li M, et al. A new class of nucleating agents for poly(L-lactic acid): environmentally-friendly metal salts with biomass-derived ligands and advanced nucleation ability. Int J Biol Macromol. 2023;225:1599-1606. doi: 10.1016/j.ijbiomac.2022.11.216
  16. Yu B, Meng L, Fu S, et al. Morphology and internal structure control over PLA microspheres by compounding PLLA and PDLA and effects on drug release behavior. Colloid Surface B. 2018;172:105-112. doi: 10.1016/j.colsurfb.2018.08.037
  17. Zhang Y, Wang Y, Wang B, et al. Exclusive formation of poly(lactide) stereocomplexes with enhanced melt stability via regenerated cellulose assisted Pickering emulsion approach. Compos Commun. 2022;32:101138. doi: 10.1016/j.coco.2022.101138
  18. Zhou W, Chen X, Yang K, et al. Achieving morphological evolution and interfacial enhancement in fully degradable and supertough polylactide/polyurethane elastomer blends by interfacial stereocomplexation. Appl Surf Sci. 2022;572:151393. doi: 10.1016/j.apsusc.2021.151393
  19. Zhang H, Bai H, Deng S, et al. Achieving all-polylactide fibers with significantly enhanced heat resistance and tensile strength via in situ formation of nanofibrilized stereocomplex polylactide. Polymer. 2019;166:13-20. doi: 10.1016/j.polymer.2019.01.040
  20. Jalali A, Romero-Diez S, Nofar M, et al. Entirely environment-friendly polylactide composites with outstanding heat resistance and superior mechanical performance fabricated by spunbond technology: exploring the role of nanofibrillated stereocomplex polylactide crystals. Int J Biol Macromol. 2021;193:2210-2220. doi: 10.1016/j.ijbiomac.2021.11.052
  21. Li J, Ye W, Fan Z, et al. A novel stereocomplex poly (lactic acid) with shish-kebab crystals and bionic surface structures as bioimplant materials for tissue engineering applications. ACS Appl Mater Interfaces. 2021;13:5469-5477. doi: 10.1021/acsami.0c17465
  22. Feng L, Bian X, Li G, et al. Thermal properties and structural evolution of poly(l-lactide)/poly(d-lactide) blends. Macromolecules. 2021;54:10163-10176. doi: 10.1021/acs.macromol.1c01866
  23. Körber S, Moser K, Diemert J. Development of high temperature resistant stereocomplex PLA for injection moulding. Polymers. 2022;14:384. doi: 10.3390/polym14030384
  24. Yan Q, Dong H, Su J, et al. A review of 3D printing technology for medical applications. Engineering. 2018;4:729-742. doi: 10.1016/j.eng.2018.07.021
  25. Liu X, Zhang J, Cheng X, et al. Integrated printed BDNF-stimulated HUCMSCs-derived exosomes/collagen/chitosan biological scaffolds with 3D printing technology promoted the remodelling of neural networks after traumatic brain injury. Regen Biomater. 2023;10:rbac085. doi: 10.1093/rb/rbac085
  26. Jiang S, Wang M, He J. A review of biomimetic scaffolds for bone regeneration: toward a cell‐free strategy. Bioeng Transl Med. 2021;6:e10206. doi: 10.1002/btm2.10206
  27. Jia W, Li H, Wang Z, et al. 3D composite lithium metal with multilevel micro-nano structure combined with surface modification for stable lithium metal anodes. Appl Surf Sci. 2021;570:151159.doi: 10.1016/j.apsusc.2021.151159
  28. Feng C, Ma B, Xu M, et al. Three-dimensional printing of scaffolds with synergistic effects of micro–nano surfaces and hollow channels for bone regeneration. ACS Biomater Sci Eng. 2020;7:872-880. doi: 10.1021/acsbiomaterials.9b01824
  29. Fan T, Qin J, Dong F, et al. Effects on the crystallization behavior and biocompatibility of poly(LLA-ran-PDO-ran- GA) with poly(d-lactide) as nucleating agents. RSC Adv. 2022;12:10711-10724. doi: 10.1039/d2ra00525e
  30. Yu H, Chen X, Cai J, et al. Novel porous three-dimensional nanofibrous scaffolds for accelerating wound healing. Chem Eng J. 2019;369:253-262. doi: 10.1016/j.cej.2019.03.091
  31. Peng MW, Yu XL, Guan Y, et al. Underlying promotion mechanism of high concentration of silver nanoparticles on anammox process. ACS Nano. 2019;13:14500-14510. doi: 10.1021/acsnano.9b08263
  32. Zhang Y, Ge T, Li Y, et al. Anti-fouling and anti-biofilm performance of self-polishing waterborne polyurethane with Gemini quaternary ammonium salts. Polymers. 2023;15:317. doi: 10.3390/polym15020317
  33. Zhao Z, Yang L, Hu Y, et al. Enzymatic degradation of block copolymers obtained by sequential ring opening polymerization of l-lactide and ε-caprolactone. Polym Degrad Stabil. 2007;92:1769-1777. doi: 10.1016/j.polymdegradstab.2007.07.012
  34. Chen Z, Ding D, Yu T, et al. Enzymatic degradation behaviors and kinetics of bio-degradable jute/poly (lactic acid)(PLA) composites. Compos Commun. 2022;33:101227. doi: 10.1016/j.coco.2022.101227
  35. Huang Q, Hiyama M, Kabe T, et al. Enzymatic self-biodegradation of poly(l-lactic acid) films by embedded heat-treated and immobilized proteinase K. Biomacromolecules. 2020;21:3301-3307. doi: 10.1021/acs.biomac.0c00759
  36. Arbeiter D, Lebahn K, Reske T, et al. Comparison of accelerated and enzyme-associated real-time degradation of HMW PLLA and HMW P3HB films. Polym Test. 2022;107:107471. doi: 10.1016/j.polymertesting.2021.107471

 

Next article in this issue
Share
Back to top
International Journal of Bioprinting, Electronic ISSN: 2424-8002 Print ISSN: 2424-7723, Published by AccScience Publishing
We use cookies on our website to ensure you get the best experience.
Read more about our cookies here
Accept