AccScience Publishing / MSAM / Online First / DOI: 10.36922/MSAM026360090
Cite this article
6
Download
52
Views
Related Info Links
More by Authors Links
Journal Browser
Volume | Year
Issue
Search
News and Announcements
View All
ORIGINAL RESEARCH ARTICLE

Effect of steady magnetic field on microstructure and microhardness of laser-directed energy-deposited Ti6Al4V/TiC composite coatings

Qingmei Qian1,2 ,  Quanou Yang2,3 ,  Chao Zeng2,3*
Show Less
1 Department of Mechanical Engineering, School of Mechanical and Electrical Engineering, Guizhou Normal University, Guiyang, Guizhou , China
2 Department of Aircraft Manufacturing Engineering, School of Aerospace Engineering, Guizhou Institute of Technology, Guiyang, Guizhou , China
3 Guizhou Science and Technology Innovation Leading Talent Station of Aerospace Propulsion System, Guiyang, Guizhou , China
Received: 3 September 2026 | Revised: 10 October 2026 | Accepted: 15 October 2026 | Published online: 16 November 2026
© 2026 by the Author(s). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International License ( https://creativecommons.org/licenses/by/4.0/ )
Abstract

Coarse microstructures, reinforcement agglomeration, and non-uniform property distribution are critical issues in laser-directed energy-deposited Ti6Al4V/TiC composite coatings. To address these issues, this study adopts a steady magnetic field with gradient intensities to assist the laser-directed energy deposition process. Ti-based composite coatings were fabricated on Ti6Al4V substrates under three laser processes with different heat inputs. Macroscopic observation, microstructural characterization, and microhardness tests were performed to investigate the coupled effects of magnetic field strength and laser heat input on coating formation quality, microstructural evolution, and microhardness. A magnetic modulation coupling coefficient K was proposed to quantitatively evaluate the modulation performance. The results show that the steady magnetic field effectively improved the macroscopic forming quality of the coatings. Surface defects decreased, and the wetting angle increased monotonically with rising magnetic field strength. The magnetic field’s modulation of microstructure and hardness was highly process-dependent. Under medium- (1,000 W, 350 mm/min, 1.2 r/min) and low-heat-input processes (800 W, 350 mm/min, 1.0 r/min), a low magnetic field of 4.07 mT yielded the optimal grain refinement and TiC dispersion uniformity. For the low-heat-input process, coating hardness first decreased slightly and then increased continuously with increasing magnetic field strength. For the medium-heat-input process, hardness increased monotonically, reaching its maximum at 12.11 mT. Under the high-heat-input process (1,200 W, 250 mm/min, 1.0 r/min), a low magnetic field aggravated microstructural coarsening, and significant strengthening was achieved only when the field strength reached 12.11 mT. The maximum coating hardness reached 1155.16 HV0.2, 50.85% higher than that of the sample without a magnetic field. The hardness evolution is governed by the combined effect of grain refinement and second-phase evolution. The proposed coupling coefficient can effectively quantify the interaction between the magnetic field and laser energy, providing a theoretical reference for optimizing steady-magnetic-field-assisted laser-directed energy deposition.

Keywords
Ti6Al4V/TiC
Laser-directed energy deposition
Steady magnetic field
Microstructure
Microhardness
Funding
This work was supported by the National Natural Science Foundation of China (grant number 12662016); the Guizhou Science and Technology Department (grant numbers Qiankehejichu ZD [2025] 040 and Qiankehejichu QN [2026] 012-3); and the Guizhou Institute of Technology (grant numbers XJGC20190947 and 2026GCC011).
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
References
  1. Kumar C, Das M, Paul CP, Bindra KS. Comparison of bead shape, microstructure and mechanical properties of fiber laser beam welding of 2 mm thick plates of Ti-6Al-4V alloy. Opt Laser Technol. 2018;105:306-321. doi: 10.1016/j.optlastec.2018.02.021
  2. Liu Y, Ding Y, Yang L, Sun R, Zhang T, Yang X. Research and progress of laser cladding on engineering alloys: A review. J Manuf Process. 2021;66:341-363. doi: 10.1016/j.jmapro.2021.03.061
  3. Hu Y, Wang L, Yao J, Xia H, Liu R. Effects of electromagnetic compound field on the escape behavior of pores in molten pool during laser cladding. Surf Coat Technol. 2020;383:125198. doi: 10.1016/j.surfcoat.2019.125198
  4. Ge H, Xu H, Wang J, Li J, Yao J. Investigation on composition distribution of dissimilar laser cladding process using a three-phase model. Int J Heat Mass Transf. 2021;170:120975. doi: 10.1016/j.ijheatmasstransfer.2021.120975
  5. Zeng C, Xue J, Jia Y, et al. A review of additive manufacturing of metallic materials assisted by electromagnetic field technology. J Manuf Process. 2024;131:920-946. doi: 10.1016/j.jmapro.2024.09.078
  6. Bachmann M, Avilov V, Gumenyuk A, Rethmeier M. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts. Int J Heat Mass Transf. 2013;60:309-321. doi: 10.1016/j.ijheatmasstransfer.2013.01.015
  7. Li X, Wang X, Wang Y, Yu Y, Hu Z, Zhao Y. Microscopic characteristics and properties of co-based coating by pulse current-assisted laser cladding on high carbon steel. Surf Coat Technol. 2024;494:131367. doi: 10.1016/j.surfcoat.2024.131367
  8. Zhao R, Chen C, Shuai S, et al. Enhanced mechanical properties of Ti6Al4V alloy fabricated by laser additive manufacturing under static magnetic field. Mater Res Lett. 2022;10(8):530-538. doi: 10.1080/21663831.2022.2064195
  9. Liu C, Wu Y, Zhou J, Wen Y, Wang L, Xie L. Effect of in situ electromagnetic field manipulation on the microstructure and hardness of titanium alloy during laser melting deposition. Mater Sci Addit Manuf. 2025;4(1):8332. doi: 10.36922/msam.8332
  10. Qi K, Yang Y, Liang W, Jin K, Xiong L. Effect of magnetic field on the microstructure and wear properties of TiB2/metal composite layers synthesized in situ by laser cladding on Ti–6Al–4V alloy. Ceram Int. 2021;47(20):29463-29474. doi: 10.1016/j.ceramint.2021.07.114
  11. Wang Q, Zhai L, Zhang L, Zhang J, Ban C. Effect of steady magnetic field on microstructure and properties of laser cladding Ni-based alloy coating. J Mater Res Technol. 2022;17:2145-2157. doi: 10.1016/j.jmrt.2022.01.160
  12. Bachmann M, Avilov V, Gumenyuk A, Rethmeier M. Experimental and Numerical Investigation of an Electromagnetic Weld Pool Control for Laser Beam Welding. Phys Procedia. 2014;56:515-524. doi: 10.1016/j.phpro.2014.08.006
  13. Bachmann M, Avilov V, Gumenyuk A, Rethmeier M. Numerical assessment and experimental verification of the influence of the Hartmann effect in laser beam welding processes by steady magnetic fields. Int J Therm Sci. 2016;101:24-34. doi: 10.1016/j.ijthermalsci.2015.10.030
  14. Liu H, Liu Z, Zhang X, Shi H, Jiang Y. Wenheng Cichang Sheji Ji Dianliu Qiangdu Dui Jiguang Rongfu Fe55 Tuceng Weijiegou De Yingxiang [Design of steady-state magnetic field and effect of current intensity on microstructure of Fe55 alloy coating by laser cladding]. Infrared Laser Eng. 2017;46(4):406001. [In Chinese] doi: 10.3788/IRLA201746.0406001
  15. Huang L, Zhou J, Xu J, et al. Microstructure and wear resistance of electromagnetic field assisted multi-layer laser clad Fe901 coating. Surf Coat Technol. 2020;395:125876. doi: 10.1016/j.surfcoat.2020.125876
  16. Zhuang D, Yao W-S, Tao W, Lian X-L, Zhang L-S. Effect of TiC content on the microstructure and properties of Ni60A coatings produced by laser cladding. Sci Technol Weld Join. 2025;30:187-197. doi: 10.1177/13621718251332053
  17. Chen Z, Zhou H, Li M, Zhang G, Xu C, He F. Effect of magnetic field waveform on microstructure and properties of laser cladding. Mater Lett: X. 2021;11:100084. doi: 10.1016/j.mlblux.2021.100084
  18. Huo K, Zhou J, Dai F, Xu J. Particle distribution and microstructure of IN718/WC composite coating fabricated by electromagnetic compound field-assisted laser cladding. Appl Surf Sci. 2021;545:149078. doi: 10.1016/j.apsusc.2021.149078
  19. Xu W, Li Y, Bai JF. Effect of magnetic field assisted thermal diffusion on microstructure and properties of titanium alloy laser cladding coating. AIP Adv. 2023;13(9):0169096. doi: 10.1063/5.0169096
  20. Chen N, Huaqiang X, Ren L, et al. Microstructure and Tribological Properties of Laser-Cladded TiC /TiAl Composite Coatings on TC4 Alloy. Tribol Int. 2024;192:109236. doi: 10.1016/j.triboint.2023.109236
  21. Zhan D, Jiang D, Tong Y, et al. Effect of Electromagnetic Field Assistance on the Wear and Corrosion Resistance of Nickel-Based Coating by Laser Cladding. Metals. 2024;14(9):998. doi: 10.3390/met14090998
  22. Shi Y, Zhou X, Wang X, Feng X, Peng L. Effects of Electromagnetic Fields on the Microstructure of Laser Cladding. Materials. 2022;15(12):4198. doi: 10.3390/ma15124198
  23. Tan W, Wen S, Bailey N, Shin Y. Multiscale Modeling of Transport Phenomena and Dendritic Growth in Laser Cladding Processes. Metall Mater Trans B. 2011;42(6):1306-1318. doi: 10.1007/s11663-011-9545-y
  24. Niu W, Song B, Han J, et al. Effect of static magnetic field on microstructure and mechanical property of AlSi10Mg alloy by laser directed energy deposition. J Mater Res Technol. 2025;34:2392-2402. doi: 10.1016/j.jmrt.2024.12.237
  25. Fan X, Fleming T, Rees D, et al. Thermoelectric magnetohydrodynamic control of melt pool flow during laser directed energy deposition additive manufacturing. Addit Manuf. 2023;71:103587. doi: 10.1016/j.addma.2023.103587
  26. Xie S, Jiang K, Wang L, Yao J. A Study on the Dynamic Evolution Mechanism of the Steady Magnetic Field on the Internal Flow Behavior of a Laser Melting Pool. Metals. 2023;13(4):720. doi: 10.3390/met13040720
  27. Hou Y, Gao Z, Li C. Solidification Processing of Metallic Materials in Static Magnetic Field: A Review. Metals. 2022;12(11):1778. doi: 10.3390/met12111778
  28. Huang S, Sing SL, de Looze G, Wilson R, Yeong WY. Laser powder bed fusion of titanium-tantalum alloys: Compositions and designs for biomedical applications. J Mech Behav Biomed Mater. 2020;108:103775. doi: 10.1016/j.jmbbm.2020.103775
  29. Kaschel FR, Vijayaraghavan RK, Shmeliov A, et al. Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses. Acta Mater. 2020;188:720-732. doi: 10.1016/j.actamat.2020.02.056
  30. Liang G, Yang Z, Liu C, Wang Y, Wang J, Qiu Z-Z. Microstructure evolution and corrosion mechanism of TiN-reinforced high-entropy alloy coatings via magnetic field-assisted laser cladding. J Alloy Compd. 2025;1042:184081. doi: 10.1016/j.jallcom.2025.184081
  31. Niessen F, Gazder A. Discriminating ß, α and α″ phases in metastable titanium alloys via segmentation: A combined electron backscattering diffraction and energy-dispersive X-ray spectroscopy approach. Ultramicroscopy. 2020;211:112943. doi: 10.1016/j.ultramic.2020.112943
  32. Li H, Cai W. Understanding the deformation mechanism of individual phases of a dual-phase beta type titanium alloy using in situ diffraction method. Mater Sci Eng A. 2018;728:151-156. doi: 10.1016/j.msea.2018.05.017
  33. Zhang B, Shirvani K, Taheri M, Beirami K, Wang Y. Effect of TiC and Magnetic Field on Microstructure and Mechanical Properties of IN738 Superalloy Processed by Selective Laser Melting. J Mater Eng Perform. 2024;33(7):3494-3509. doi: 10.1007/s11665-023-08228-2
  34. Davoust L, Cowley Md, Moreau R, Bolcato R. Buoyancy-driven convection with a uniform magnetic field. Part 2. Experimental investigation. J Fluid Mech. 1999;400:59-90. doi: 10.1017/S002211209900645X
  35. Goodarzi DM, Pekkarinen J, Salminen A. Effect of process parameters in laser cladding on substrate melted areas and the substrate melted shape. J Laser Appl. 2015;27(S2):S29201. doi: 10.2351/1.4906376
  36. Yuan W, Li R, Chen Z, Gu J, Tian Y. A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings. Surf Coat Technol. 2021;405:126582. doi: 10.1016/j.surfcoat.2020.126582
  37. Bartkowski D, Bartkowska A, Jurči P. Laser cladding process of Fe/WC metal matrix composite coatings on low carbon steel using Yb: YAG disk laser. Opt Laser Technol. 2021;136:106784. doi: 10.1016/j.optlastec.2020.106784
  38. Chen C, Zhang K, Zhao R, et al. Laser powder bed fusion of GH4099 Ni-based superalloy under a static magnetic field with tailored microstructure and enhanced mechanical performance. Virtual Phys Prototyp. 2024;19(1):e2411023. doi: 10.1080/17452759.2024.2411023
  39. Shi B, Li T, Guo Z, Zhang X, Zhang H. Selecting process parameters of crack-free Ni60A alloy coating prepared by coaxial laser cladding. Opt Laser Technol. 2022;149:107805. doi: 10.1016/j.optlastec.2021.107805
  40. Filimonov AM, Rogozin OA, Dubinin ON, et al. Modification of Mechanical Properties in Directed Energy Deposition by a Static Magnetic Field: Experimental and Theoretical Analysis. Materials. 2021;14(18):5190. doi: 10.3390/ma14185190
  41. Tan H, Jing C, Zhang F, Lin X, Weidong H. Microstructure and Mechanical Properties of Laser Solid Formed Ti-6Al-4V from Blended Elemental Powders. Rare Metal Mat Eng. 2009;38(4):574-578. doi: 10.1016/S1875-5372(10)60028-8
  42. Poyraz Ö, Kushan M. Investigation of the effect of different process parameters for laser additive manufacturing of metals. J Fac Eng Archit Gazi Univ. 2018;33(2):699-711. doi: 10.1007/s00170-01462972
  43. Wang Z, Gui W, Fu J, Zhu P, Lu Y. Microstructure and Properties of Electromagnetic Field-Assisted Laser-Clad Norem02 Iron-Based Cemented Carbide Coating. Materials. 2023;16(20):6774. doi: 10.3390/ma16206774
Share
Back to top
Materials Science in Additive Manufacturing, Electronic ISSN: 2810-9635 Published by AccScience Publishing