AccScience Publishing / MSAM / Volume 5 / Issue 1 / DOI: 10.36922/MSAM025350080
Submit to MSAM
Cite this article
2
Download
32
Views
Journal Browser
Volume | Year
Issue
Search
Forthcoming Issue
Current Issue
View All
News and Announcements
View All
ORIGINAL RESEARCH ARTICLE

Preparation of porous magnesium alloy scaffolds with high formation quality and dimensional accuracy through contour scan optimization in laser powder bed fusion

Zeyu Feng1 ,  Hao Zheng1 ,  Baoxue Zhou1 ,  Bozun Miao1 ,  Penghuai Fu1 ,  Deli Wang2 ,  Hua Huang1* ,  Guangyin Yuan1,2*
Show Less
1 National Engineering Research Center of Light Alloy Net Forming and Key State Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
2 National and Local Joint Engineering Research Center of Orthopaedic Biomaterials, Peking University Shenzhen Hospital, Shenzhen, Guangdong 518036, China
MSAM 2026, 5(1), 025350080 https://doi.org/10.36922/MSAM025350080
Received: 26 August 2025 | Accepted: 26 September 2025 | Published online: 30 October 2025
© 2025 by the Author(s). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International License ( https://creativecommons.org/licenses/by/4.0/ )
Download PDF
XML
Cite
Abstract

Biodegradable magnesium-based scaffolds for bone tissue engineering are considered a promising treatment approach for repairing large bone defects. In this study, porous magnesium-neodymium-zinc-zirconium alloy (JDBM) scaffolds were fabricated using laser powder bed fusion (L-PBF) followed by dynamic electrochemical polishing. The effects of laser energy input and contour scan strategy on the formation quality of L-PBF scaffolds were systematically investigated. A novel scanning strategy, C64F84, combining low laser power for contour scans with high laser power for filling scans, was developed to achieve good fusion quality while controlling surface powder adhesion and dross defects. The printed specimens achieved a maximum relative density of 99.54%. The effects of electrochemical polishing on L-PBF scaffolds with different contour scan strategies were further evaluated. Electrochemical polishing effectively removed excess adhered powder and brought the scaffold porosity in line with the intended design value. The polished C64F84 scaffold exhibited higher dimensional accuracy, with smaller mean deviations, due to improved geometric consistency in the L-PBF process. Finite element analysis results were consistent with compression test data, confirming the high quality of the prepared C64F84 scaffolds. The yield strength (23.88 MPa) and elastic modulus (0.855 GPa) were comparable to those of cancellous bone, highlighting the medical potential of L-PBF-fabricated JDBM scaffolds.

Graphical abstract
Keywords
Magnesium alloy scaffolds
Laser powder bed fusion
Formation quality
Dimensional accuracy
Finite element analysis
Funding
This work was supported by the National Key Research and Development Program of China (No.2024YFB4610100, No.2024YFC2418602), the National Natural Science Foundation of China (No.52130104), Shanghai Jiao Tong University Medial-Engineering Cross Fund (YG2024LC05), the Scientific Research Foundation for Shenzhen high-level talents (No.RC2022-003), Guangdong Basic and Applied Basic Research Foundation (No.2022B1515120046), Sanming Project of Medicine in Shenzhen (No.SZSM202211038) and Shanghai Science and Technology Committee(23JC1402400).
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
References
  1. Turnbull G, Clarke J, Picard F, et al. 3D bioactive composite scaffolds for bone tissue engineering. Bioact Mater. 2018;3(3):278-314. doi: 10.1016/j.bioactmat.2017.10.001

 

  1. Koons GL, Diba ML, Mikos AG. Materials design for bone-tissue engineering. Nat Rev Mater. 2020;5(8):584-603. doi: 10.1038/s41578-020-0204-2

 

  1. Chen Y, Xu Z, Smith C, Sankar J. Recent advances on the development of magnesium alloys for biodegradable implants. Acta Biomater. 2014;10(11):4561-4573. doi: 10.1016/j.actbio.2014.07.005

 

  1. Shanmugavadivu A, Lekhavadhani S, Babu S, Suresh N, Selvamurugan N. Magnesium-incorporated biocomposite scaffolds: A novel frontier in bone tissue engineering. J Magnesium Alloys. 2024;12(6):2231-2248. doi: 10.1016/j.jma.2024.06.001

 

  1. Xing F, Li S, Yin D, et al. Recent progress in Mg-based alloys as a novel bioabsorbable biomaterials for orthopedic applications. J. Magnesium Alloys. 2022;10(6):1428-1456. doi: 10.1016/j.jma.2022.02.013

 

  1. Wang W, Jia G, Wang Q, et al. The in vitro and in vivo biological effects and osteogenic activity of novel biodegradable porous Mg alloy scaffolds. Mater Des. 2020;189:108514. doi: 10.1016/j.matdes.2020.108514

 

  1. Alex Y, Vincent S, Divakaran N, et al. Pioneering bone regeneration: A review of cutting-edge scaffolds in tissue engineering. Bioprinting. 2024;43:e00364. doi: 10.1016/j.bprint.2024.e00364

 

  1. Jia G, Huang H, Niu J, et al. Exploring the interconnectivity of biomimetic hierarchical porous Mg scaffolds for bone tissue engineering: Effects of pore size distribution on mechanical properties, degradation behavior and cell migration ability. J Magnesium Alloys. 2021;9(6):1954-1966. doi: 10.1016/j.jma.2021.02.001

 

  1. Zheng YF, Gu XN, Witte F. Biodegradable metals. Mater Sci Eng R Rep. 2024;77:1-34. doi: 10.1016/j.mser.2014.01.001

 

  1. Li Y, Jahr H, Zhou J, Zadpoor AA. Additively manufactured biodegradable porous metals. Acta Biomater. 2020;115:29-50.doi: 10.1016/j.actbio.2020.08.018

 

  1. Sezer N, Evis Z, Koç M. Additive manufacturing of biodegradable magnesium implants and scaffolds: Review of the recent advances and research trends. J Magnesium Alloys. 2021;9(2):392-415. doi: 10.1016/j.jma.2020.09.014

 

  1. Pourrahimi S, Hof LA. On the post-processing of complex additive manufactured metallic parts: A review. Adv Eng Mater. 2024;26(10):2301511. doi: 10.1002/adem.202301511

 

  1. Niu X, Shen H, Fu J, et al. Corrosion behaviour of laser powder bed fused bulk pure magnesium in hank’s solution. Corros Sci. 2019;157:284-294. doi: 10.1016/j.corsci.2019.05.026

 

  1. Peng B, Xu H, Song F, et al. Additive manufacturing of porous magnesium alloys for biodegradable orthopedic implants: Process, design, and modification. J Mater Sci Technol. 2024;182:79-110. doi: 10.1016/j.jmst.2023.08.072

 

  1. Qin Y, Wen P, Guo H, et al. Additive manufacturing of biodegradable metals: Current research status and future perspectives. Acta Biomater. 2019;98:3-22. doi: 10.1016/j.actbio.2019.04.046

 

  1. Yin B, Liu J, Peng B, et al. Influence of layer thickness on formation quality, microstructure, mechanical properties, and corrosion resistance of WE43 magnesium alloy fabricated by laser powder bed fusion. J Magnesium Alloys. 2024;12(4):1367-1385. doi: 10.1016/j.jma.2022.09.016

 

  1. Li K, Ji C, Bai S, et al. Selective laser melting of magnesium alloys: Necessity, formability, performance, optimization and applications. J Mater Sci Technol. 2023;154:65-93. doi: 10.1016/j.jmst.2022.12.053

 

  1. Sadat Hashemi T, Jaiswal S, McCarthy HO, Levingstone TJ, Dunne NJ. Biofunctionalisation of porous additively manufactured magnesium-based alloys for Orthopaedic applications: A review. Biomater Adv. 2025;169:214170. doi: 10.1016/j.bioadv.2024.214170

 

  1. Xie K, Wang N, Guo Y, et al. Additively manufactured biodegradable porous magnesium implants for elimination of implant-related infections: An in vitro and in vivo study. Bioact Mater. 2021;8:140-152. doi: 10.1016/j.bioactmat.2021.06.032

 

  1. Wang Y, Huang H, Jia G, Zeng H, Yuan G. Fatigue and dynamic biodegradation behavior of additively manufactured Mg scaffolds. Acta Biomater. 2021;135:705-722. doi: 10.sci1016/j.actbio.2021.08.040

 

  1. Ansari N, Alabtah FG, Albakri MI, Khraisheh M. Post processing of additive manufactured Mg alloys: Current status, challenges, and opportunities. J Magnesium Alloys. 2024;12(4):1283-1310. doi: 10.1016/j.jma.2024.04.017

 

  1. Wang Y, Wang L, Liu D, et al. Mechanisms of processing map difference between laser powder bed fusion of Mg solid cubes and lattice structures. Addit Manuf. 2023;76:103773. doi: 10.1016/j.addma.2023.103773

 

  1. Liu J, Liu B, Min S, et al. Biodegradable magnesium alloy WE43 porous scaffolds fabricated by laser powder bed fusion for orthopedic applications: Process optimization, in vitro and in vivo investigation. Bioact Mater. 2022;16:301-319. doi: 10.1016/j.bioactmat.2022.02.020

 

  1. Chen H, Gu D, Xiong J, et al. Improving additive manufacturing processability of hard-to-process overhanging structure by selective laser melting. J Mater Process Technol. 2017;250:99-108. doi: 10.1016/j.jmatprotec.2017.06.044

 

  1. Charles A, Bayat M, Elkaseer A, et al. Elucidation of dross formation in laser powder bed fusion at down-facing surfaces: Phenomenon-oriented multiphysics simulation and experimental validation. Addit Manuf. 2022;50:102551. doi: 10.1016/j.addma.2021.102551

 

  1. Qin H, Zhao Y, An Z, et al. Enhanced antibacterial properties, biocompatibility, and corrosion resistance of degradable Mg-Nd-Zn-Zr alloy. Biomaterials. 2015;53:211-220. doi: 10.1016/j.biomaterials.2015.02.096

 

  1. Xie K, Wang L, Guo Y, et al. Effectiveness and safety of biodegradable Mg-Nd-Zn-Zr alloy screws for the treatment of medial malleolar fractures. J Orthop Transl. 2021;27:96-100. doi: 10.1016/j.jot.2020.11.007

 

  1. Xuehua W, Junying L, Youwen Y, et al. Laser powder bed fusion of biodegradable magnesium alloys: Process, microstructure and properties. Int J Extreme Manuf. 2025;7(2):022007. doi: 10.1088/2631-7990/ad967e

 

  1. Tan C, Li S, Essa K, et al. Laser Powder Bed Fusion of Ti-rich TiNi lattice structures: Process optimisation, geometrical integrity, and phase transformations. Int J Mach Tools Manuf. 2019;141:19-29. doi: 10.1016/j.ijmachtools.2019.04.002

 

  1. Kasperovich G, Haubrich J, Gussone J, et al. Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting. Mater Des. 2016;105:160-170. doi: 10.1016/j.matdes.2016.05.070

 

  1. Zhang C, Zheng H, Yang L, et al. Mechanical responses of sheet-based gyroid-type triply periodic minimal surface lattice structures fabricated using selective laser melting. Mater Des. 2022;214:110407. doi: 10.1016/j.matdes.2022.110407

 

  1. Snow Z, Nassar AR, Reutzel EW. Invited Review Article: Review of the formation and impact of flaws in powder bed fusion additive manufacturing. Addit Manuf. 2020;36:101457. doi: 10.1016/j.addma.2020.101457

 

  1. Wei HL, Mukherjee T, Zhang W, et al. Mechanistic models for additive manufacturing of metallic components. Prog Mater Sci. 2021;116:100703. doi: 10.1016/j.pmatsci.2020.100703

 

  1. Hussain A, Kim D. Fabrication of metal alloy structures with overhang features in laser-based powder bed fusion: A critical review of challenges and latest developments. J Manuf Processes. 2025;135:112-130. doi: 10.1016/j.jmapro.2025.01.031

 

  1. Carter LN, Villapún VM, Grover L, et al. Exploring the duality of powder adhesion and underlying surface roughness in laser powder bed fusion processed Ti-6Al-4V. J Manuf Processes. 2022;81:14-26. doi: 10.1016/j.jmapro.2022.06.057

 

  1. Huang L, Wan H, Han Q, et al. Mitigating surface notches for enhanced fatigue performance of metallic gyroid structures via contour scanning. Int J Mech Sci. 2025;286:109913. doi: 10.1016/j.ijmecsci.2024.109913

 

  1. Liu J, Wen P. Metal vaporization and its influence during laser powder bed fusion process. Mater Des. 2022;215:110505. doi: 10.1016/j.matdes.2022.110505

 

  1. Ren Z, Wei D, Wang S, Zhang DZ, Mao S. On the role of pre- and post-contour scanning in laser powder bed fusion: Thermal-fluid dynamics and laser reflections. Int J Mech Sci. 2022;226:107389. doi: 10.1016/j.ijmecsci.2022.107389

 

  1. Han W, Fang F. Fundamental aspects and recent developments in electropolishing. Int J Mach Tools Manuf. 2019;139:1-23. doi: 10.1016/j.ijmachtools.2019.01.001

 

  1. Maleki E, Salehnasab B, Paul M, Shao S, Shamsaei N. Dimensional accuracy of fabricated geometries through powder bed fusion: An overview and a new benchmark artifact proposal. Mater Des. 2025;114361. doi: 10.1016/j.matdes.2025.114361

 

  1. Wang Y, Fu P, Wang N, et al. Challenges and solutions for the additive manufacturing of biodegradable magnesium implants. Engineering. 2020;6(11):1267-1275. doi: 10.1016/j.eng.2020.02.015
Next article in this issue
Share
Back to top
Materials Science in Additive Manufacturing, Electronic ISSN: 2810-9635 Published by AccScience Publishing
We use cookies on our website to ensure you get the best experience.
Read more about our cookies here
Accept