Modeling the dependency structure between quality characteristics in multi-stage manufacturing processes with copula functions
This study is about multi-stage manufacturing processes and their control by statistical process control modeling. There are two kinds of dependence structures in a multi-stage manufacturing process: one is the dependence between the stages of the process, and the other is the dependence between the concerned quality characteristics. This study employs state-space models to demonstrate the dependency structure between the process stages and uses the Kalman filter method to estimate the states of the processes. In this setup, copula modeling is proposed to determine the dependence structure between the quality characteristics of interest. A simulation study is conducted to assess the model's accuracy. As a result, it was found that the model gives highly accurate predictions according to the mean absolute percentage error (MAPE) criteria (<10%).
[1] Montgomery, D. C. (2019). Introduction to statistical quality control. John wiley & sons.
[2] Hayter, A. J., & Tsui, K. L. (1994). Identification and quantification in multivariate quality control problems. Journal of quality technology, 26(3), 197- 208.
[3] Hotelling, H, (1947). Multivarite Quality Control, Techniques of Statistical Analysis, Einshart, Hastay and Wallis (eds.), McGraw-Hill, New York, A.B.D.
[4] Hicks, C. R. (1955). Some Applications of Hotelling's T2. Industrial Quality Control, 11(9), 23- 26.
[5] Hawkins, D. M. (1991). Multivariate quality control based on regression-adiusted variables. Technometrics, 33(1), 61-75.
[6] Hawkins, D. M. (1993). Regression adjustment for variables in multivariate quality control. Journal of quality Technology, 25(3), 170-182.
[7] Zhang, G. X. (1985). Cause-selecting control charts- a newtype of quality control charts. The QR Journal, 12(4), 221-225.
[8] Wade, M. R., & Woodall, W. H. (1993). A review and analysis of cause-selecting control charts. Journal of quality technology, 25(3), 161-169.
[9] Shu, L., & Tsung, F. (2003). On multistage statistical process control. Journal of the Chinese Institute of Industrial Engineers, 20(1), 1-8.
[10] Ding, Y., Ceglarek, D., & Shi, J. (2002). Fault diagnosis of multistage manufacturing processes by using state space approach. J. Manuf. Sci. Eng., 124(2), 313-322.
[11] Lawless, J. F., Mackay, R. J., & Robinson, J. A.(1999). Analysis of variation transmission in manufacturing processes—part I. Journal of Quality Technology, 31(2), 131-142.
[12] Agrawal, R., Lawless, J. F., & Mackay, R. J. (1999). Analysis of variation transmission in manufacturing processes—part II. Journal of Quality Technology, 31(2), 143-154.
[13] Jin, J., & Shi, J. (1999). State space modeling of sheet metal assembly for dimensional control, J. Manuf. Sci. Eng., 121(4): 756-762.
[14] Basseville, M., & Nikiforov, I. V. (1993). Detection of abrupt changes: theory and application (Vol. 104). Englewood Cliffs: prentice Hall.
[15] Tsung, F., Li, Y., & Jin, M. (2008). Statistical process control for multistage manufacturing and service operations: a review and some extensions. International Journal of Services Operations and Informatics, 3(2), 191-204.
[16] Lindsey, J. K. (2000). A family of models for uniform and serial dependence in repeated measurements studies. Journal of the Royal Statistical Society: Series C (Applied Statistics), 49(3), 343-357.
[17] Junker, M., Szimayer, A., & Wagner, N. (2006). Nonlinear term structure dependence: Copula functions, empirics, and risk implications. Journal of Banking & Finance, 30(4), 1171-1199.
[18] Hafner, C. M., & Manner, H. (2012). Dynamic stochastic copula models: Estimation, inference and applications. Journal of applied econometrics, 27(2), 269-295.
[19] Goto, H. (2013). Model predictive control-based scheduler for repetitive discrete event systems with capacity constraints. An International Journal of Optimization and Control: Theories & Applications (IJOCTA), 3(2), 73-83.
[20] Creal,D. D., & Tsay, R. S. (2015). High dimensional dynamic stochastic copula models. Journal of Econometrics, 189(2), 335-345.
[21] Alpay, O., & Hayat, E. A. (2017). Copula approach to select input/output variables for DEA. An International Journal of Optimization and Control: Theories & Applications (IJOCTA), 7(1), 28-34.
[22] Zhang, Y., & Choudhry, T. (2017). Forecasting the daily time‐varying beta of European banks during the crisis period: comparison between GARCH models and the Kalman Filter. Journal of Forecasting, 36(8), 956-973.
[23] Fernández, M., García, J. E., & González-López, V. A. (2018). A copula-based partition Markov procedure. Communications in Statistics-Theory and Methods, 47(14), 3408-3417.
[24] Smith, M. S., & Maneesoonthorn, W. (2018). Inversion copulas from nonlinear state space models with an application to inflation forecasting. International Journal of Forecasting, 34(3), 389-407.
[25] Wang, H., Meng, A., Liu, Y., Fu, X., & Cao, G.(2019). Unscented Kalman Filter based interval state estimation of cyber physical energy system for detection of dynamic attack. Energy, 188, 116036.
[26] Xu, J., Liang, Z., Li, Y. F., & Wang, K. (2021). Generalized condition-based maintenance optimization for multi-component systems considering stochastic dependency and imperfect maintenance. Reliability Engineering & System Safety, 211, 107592.
[27] Kreuzer, A., Dalla Valle, L., & Czado, C. (2022). A Bayesian non-linear state space copula model for air pollution in Beijing. Journal of the Royal Statistical Society Series C: Applied Statistics, 71(3), 613-638.
[28] Ly, S., Sriboonchitta, S., Tang, J., & Wong, W. K.(2022). Exploring dependence structures among European electricity markets: Static and dynamic copula-GARCH and dynamic state-space approaches. Energy Reports, 8, 3827-3846.
[29] Wang, Z., Xu, X., Trajcevski, G., Zhang, K., Zhong, T., & Zhou, F. (2022, June). PrEF: Probabilistic electricity forecasting via Copula-augmented state space model. In Proceedings of the AAAI.
[30] Kreuzer, A., Dalla Valle, L., & Czado, C. (2023). Bayesian multivariate nonlinear state space copula models. Computational Statistics & Data Analysis, 188, 107820.
[31] Schweppe,F.C. (1973) Uncertain Dynamic Systems. Prentice-Hall.
[32] Kim, C-J., Nelson, C.R. (1999) State-Space Models with Regime Switching. The MIT Press.
[33] Anderson, B.D.O. and Moore, J.B. (1979) Optimal Filtering, Prentice-Hall.
[34] Brown, R.G. and Hwang, P.Y.C. (1992) Introduction to Random Signals and Applied Kalman Filtering. John Wiley and Sons.
[35] Davis, M. H. A. and Vinter, R. B. (1984) Stochastic Modelling and Control, Chapman and Hall, London NewYork.
[36] Kalman, R. E. (1960). A new approach to linear filtering and prediction problems, J. Basic Eng. Mar 1960, 82(1): 35-45.
[37] Welch, G. and Bishop, G. An Introduction to the Kalman Filter. http://www.cs.unc.edu/~welch/media/pdf/kalman _intro.pdf. Last accessdate: 05.09.2024.
[38] Özbek, L. (2000) Durum-Uzay Modellerive Kalman Filtresi, Gazi Ünv. Fen BilimleriEns. Dergisi, 13(1), 113-126.
[39] Bryson, A., & Johansen, D. (1965). Linear filtering for time-varying systems using measurements containing colored noise. IEEE Transactions on Automatic Control, 10(1), 4-10.
[40] Simon, D. (2006). Optimal state estimation: Kalman, H infinity, and nonlinear approaches. John Wiley & Sons.
[41] Nelsen, R. B. (1999) An Introduction to Copulas. Lecture Notes in Statistics, Vol. 39, Spring-Verlag, New York.
[42] Trivedi, P. K., & Zimmer, D. M. (2007). Copula modeling: an introduction for practitioners. Foundations and Trends® in Econometrics, 1(1), 1- 111.
[43] Lee, L. F. (1983). Generalized econometric models with selectivity. Econometrica: Journal of the Econometric Society, 507-512.
[44] Kolev, N., & Paiva, D. (2009). Copula-based regression models: A survey. Journal of statistical planning and inference, 139(11), 3847-3856.
[45] Drouet-Mari, D. and Kotz, S. (2001) Correlation and Dependence, First Edition, Imperial College Press, London.
[46] Lewis C. D. (1982) Industrial and Business Forecasting Methods, Butterworths, London.
[47] Toktaş, P., (2011) ÇokAşamalı İmalat Süreçleriiçin İstatistiksel Proses Kontrolü Modellemesi, (Doktora Tezi, Ankara Üniversitesi, Fen BilimleriEnstitüsü).