We are delighted to share the Top 15 Cited Articles of 2024 from journal Materials Science in Additive Manufacturing (ISSN 2810-9635). We hope these papers will provide valuable insights for your research.

1. Enhancing interlaminar adhesion in multi-material 3D printing: A study of conductive PLA and TPU interfaces through fused filament fabrication
   Guo Liang Goh, Samuel Lee, Shi Hui Cheng, Daniel Jee Seng Goh, Pothunuri Laya, Van Pho Nguyen, Boon Siew Han, Wai Yee Yeong*
   https://doi.org/10.36922/msam.2672
   
   
2. 3D printing soft robots integrated with low-melting-point alloys
   Liuchao Jin, Xiaoya Zhai, Kang Zhang, Jingchao Jiang*, Wei-Hsin Liao*
    https://doi.org/10.36922/msam.4144
   
   
3. The role of graded layers in interfacial characteristics and mechanical properties of Ti6Al4V/AlMgScZr-graded multi-material parts fabricated using laser powder bed fusion
   Guangjing Huang, Dongdong Gu*, Hong Liu, Kaijie Lin, Rui Wang, He Sun
   https://doi.org/10.36922/msam.3088
   
   
4. An experimental process parameter study on the identification of defects in additively fabricated Al6061 with laser powder bed fusion
   Faik Derya Ince, Sivaji Karna, Tianyu Zhang, Andrew J. Gross, Timothy Krentz, Dale Hitchcock, Lang Yuan*, Tuğrul Özel*
   https://doi.org/10.36922/msam.3652
   
   
5. The effect of thermal rest time during in situ alloying of Ti41Nb through laser powder bed fusion
   Guo Ren Chou, Sheng Huang, Swee Leong Sing*
   https://doi.org/10.36922/msam.3506
   
   
6. Developing a sustainable resin for 3D printing in coral restoration
   Yukai Jia, Sherin Abdelrahman, Charlotte A.E. Hauser*
   https://doi.org/10.36922/msam.3125
   
   
7. Role of customized scan strategies and dwell time on microstructure and properties of additively manufactured 316L stainless steel
   Puskar Pathak*, Goran Majkic, Venkat Selvamanickam
   https://doi.org/10.36922/msam.2676
   
   
8. Accelerating hybrid lattice structures design with machine learning
   Chenxi Peng, Phuong Tran*, Erich Rutz*
   https://doi.org/10.36922/msam.3430
   
   
9. Compressive properties and fatigue performance of NiTi lattice structures optimized by TPMS
   Yunlong Ren, Yang Li, Lei Yang*, Yun Chen*, Chunze Yan, Bing Liu, Xuan Cai, Mingkang Zhang, Yusheng Shi
   https://doi.org/10.36922/msam.3380
   
   
10. Functionally graded TPMS gyroid structures for additive manufacturing of non-pneumatic tires
    Avez Shaikh, Ankit Saxena, Jacklyn Griffis, Kazi Shahed, Guha Manogharan*
    https://doi.org/10.36922/msam.5022
    
    
11. Material extrusion-based printing optimization of recycled HDPE filaments made from used milk jugs
    Soek Po Phillis Teng, Chor Hiong Tee, Hwee Boon Tan, Kah Fai Leong*
    https://doi.org/10.36922/msam.4084
    
    
12. Porous titanium alloys for medical application: Progress in preparation process and surface modification research
    Binghao Wang, Miao Luo, Zheng Shi, Yuwei Cui, Yuting Lv, Chengliang Yang*, Liqiang Wang
    https://doi.org/10.36922/msam.2753
    
    
13. Research on impact resistance of AlSi7Mg uniform and gradient porous structures manufactured by laser powder bed fusion
    Mingkang Zhang, Guijun Bi, Jie Chen*
     https://doi.org/10.36922/msam.5729
    
    
14. Effect of bioactive borate glass on printability and physical properties of hydrogels
    Fateme Fayyazbakhsh*, Mehedi H. Tusar, Yue-Wern Huang, Ming C. Leu
    https://doi.org/10.36922/msam.2845
    
    
15. Wide-angle broadband metamaterial absorber with carbon black-carbonyl iron/polylactic acid composites fabricated by fused filament fabrication
    Fei Wang, Qianfeng Zhou, Hongsheng Liu, Pengfei Fang, Kaiyong Jiang, Peifeng Li*
    https://doi.org/10.36922/msam.4158