AccScience Publishing / MSAM / Volume 1 / Issue 4 / DOI: 10.18063/msam.v1i4.21
Cite this article
Journal Browser
Volume | Year
News and Announcements
View All

A survey of additive manufacturing reviews 

Xiaoya Zhai1 Liuchao Jin2 Jingchao Jiang2*
Show Less
1 School of Mathematical Sciences, University of Science and Technology of China, China
2 Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Shatin, Hong Kong, China
Submitted: 28 October 2022 | Published: 16 November 2022
© 2022 by the Author(s). Licensee AccScience Publishing, Singapore. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution -Noncommercial 4.0 International License (CC BY-NC 4.0) ( )

Nowadays, additive manufacturing (AM) technologies have been widely used in construction, medical, military, aerospace, fashion, etc. The advantages of AM (e.g., more design freedom, no restriction on the complexity of parts, and rapid prototyping) have attracted a growing number of researchers. Increasing number of papers are published each year. Until now, thousands of review papers have already been published in the field of AM. It is, therefore, perhaps timely to perform a survey on AM review papers so as to provide an overview and guidance for readers to choose their interested reviews on some specific topics. This survey gives detailed analysis on these reviews, divides these reviews into different groups based on the AM techniques and materials used, highlights some important reviews in this area, and provides some discussions and insights.

Additive manufacturing
3D printing

Gibson I, Rosen DW, Stucker B, et al., 2021, Additive Manufacturing Technologies. 3rded. Berlin: Springer.


International Organization for Standardization/ASTM52900, 2021, Additive manufacturing-General principles- Terminology. West Conshohocken, PA: ASTM International.


Jiang J, Xu X, Stringer J, 2019, Optimization of process planning for reducing material waste in extrusion based additive manufacturing, robot. Comput Integr Manuf, 59: 317–325.


Kabir SM, Mathur K, Seyam AF, 2020, A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties. Compos Struct, 232: 111476.


Zhuo P, Li S, Ashcroft IA, et al., 2021, Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook, Compos Part B Eng, 224: 109143.


Goh GD, Neo SJ, Dikshit V, et al., 2021, Quasi-static indentation and sound-absorbing properties of 3D printed sandwich core panels. 24: 1206–1225.


Stratasys, 2017, United States: Stratasys. Avaialble from: [Last accessed on 2018 Dec 09].


Jiang J, Xu X, Stringer J, 2019, Effect of Extrusion Temperature on Printable Threshold Overhang in Additive Manufacturing. In: 52nd CIRP Conference on Manufacturing Systems, Ljubljana.


Jiang J, Xu X, Stringer J, 2018, Support structures for additive manufacturing: A review. J Manuf Mater Process, 2: 64.


Thompson SM, Bian L, Shamsaei N, et al., 2015, An overview of direct laser deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics. Addit Manuf, 8: 36–62.


Beaman JJ, Deckard CR, 1991, Selective Laser Sintering with Assisted Powder Handling. Available from: https://www. [Last accessed on 2018 Dec 09].


Bertrand P, Bayle F, Combe C, et al., 2007, Ceramic components manufacturing by selective laser sintering. Appl Surf Sci, 254: 989–992.


Deckers J, Shahzad K, Vleugels J, et al., 2012, Isostatic pressing assisted indirect selective laser sintering of alumina components. Rapid Prototyp J, 18: 409–419.


Mahmoud D, Elbestawi MA, 2019, Selective laser melting of porosity graded lattice structures for bone implants. Int J Adv Manuf Technol, 100: 2915–2927.


Coeck S, Bisht M, Plas J, et al., 2019, Prediction of lack of fusion porosity in selective laser melting based on melt pool monitoring data. Addit Manuf, 25: 347–356.


Kruth JP, Wang X, Laoui T, et al., 2003, Lasers and materials in selective laser sintering. Assem Autom, 23L 357–371.


Siddiqui SF, Fasoro AA, Cole C, et al., 2019, Mechanical characterization and modeling of direct metal laser sintered stainless steel GP1. J Eng Mater Technol, 141: 031009.


Jiazhu W, Liu T, Chen H, et al., 2019, Simulation of laser attenuation and heat transport during direct metal deposition considering beam profile. J Mater Process Technol, 270: 92–105.


Nahmany M, Hadad Y, Aghion E, et al., 2019, Microstructural assessment and mechanical properties of electron beam welding of AlSi10Mg specimens fabricated by selective laser melting. J Mater Process Technol, 270: 228–240.


Kruth JP, Mercelis P, Van Vaerenbergh J, et al., 2005, Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyp J, 11: 26–36.


Murr LE, Gaytan SM, Ramirez DA, et al., 2012, Metal fabrication by additive manufacturing using laser and electron beam melting technologies. J Mater Sci Technol, 28: 1–14.


Yang J, Ouyang H, Wang Y, 2010, Direct metal laser fabrication: Machine development and experimental work. Int J Adv Manuf Technol, 46: 1133–1143.


Shellabear M, Nyrhilä O, 2004, DML-Development History and State of the Art. In: Proceeding 4th Laser Assisted Net Shape Engineering Conference. (LANE 2004). pp. 21–24.


Calvert P, 2001, Inkjet printing for materials and devices. Chem Mater, 13: 3299–3305.


de Gans BJ, Duineveld PC, Schubert US, et al., 2004, Inkjet Printing of Polymers: State of the Art and Future Developments. Germany: WILEY‐VCH Verlag.


Blazdell PF, Evans JR, 2000, Application of a continuous ink jet printer to solid freeforming of ceramics. J Mater Process Technol, 99: 94–102.


Slade CE, Evans JR, 1998, Freeforming ceramics using a thermal jet printer. J Mater Sci Lett, 17: 1669–1671.


Elliott AM, Ivanova OS, Williams CB, 2013, Inkjet printing of quantum dots in photopolymer for use in additive manufacturing of nanocomposites. Adv Eng Mater, 15: 903–907.


Ko SH, Chung J, Hotz N, et al., 2010, Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication. J Micromech Microeng, 20: 125010.


Polozov I, Sufiiarov V, Shamshurin A, 2019, Synthesis of titanium orthorhombic alloy using binder jetting additive manufacturing. Mater Lett, 243: 88–91.


Snelling D, Blount H, Forman C, et al., 2013, The effects of 3D pritned molds on metal castings. 2013 International Solid Freeform Fabrication Symposium, 827–845.


Williams CB, Cochran JK, Rosen DW, 2011, Additive manufacturing of metallic cellular materials via three-dimensional printing. Int J Adv Manuf Technol, 53: 231–239.


Lam CX, Mo XM, Teoh SH, et al., 2002, Scaffold development using 3D printing with a starch-based polymer. Mater Sci Eng C, 20: 49–56.


Yoo J, Cima MJ, Khanuja S, et al., 1993, Structural Ceramic Components by 3D Printing. In: International Solid Freeform Fabrication Symposium, University of Texas at Austin.


Eisenbarth D, Esteves PM, Wirth F, et al., 2019, Spatial powder flow measurement and efficiency prediction for laser direct metal deposition. Surf Coatings Technol, 362: 397–408.


Sandia National Laboratories, 1997, Creating a Complex Metal Part in a Day is Goal of Commercial Consortium. Available from: [Last accessed on 2018 Dec 09].


Griffith ML, Harwell LD, Romero J, et al., 1997, Multi-material Processing by LENS. In: Solid Freeform Fabrication Symposium Conference. Austin Texas. pp. 11–13.


Griffith ML, Ensz MT, Puskar JD, et al., 2000, Understanding the Microstructure and Properties of Components Fabricated by Laser Engineered Net Shaping (LENS). In: MRS Proceeding. Cambridge: Cambridge University Pressp. pp9.


Taminger KM, Hafley RA, 2006, Electron Beam Freeform Fabrication for Cost Effective Near-Net Shape Manufacturing. In: NATO/RTO AVT-139 Spec. Meet Cost Effective Manufacturing. via Net Shape Process. Amsterdam. Available from: search.jsp?R=20080013538 [Last accessed on 2018 Dec 09].


Weng F, Gao S, Jiang J, et al., 2019, A novel strategy to fabricate thin 316L stainless steel rods by continuous direct metal deposition in Z direction. Addit Manuf, 27: 474–481.


Jiang J, Weng F, Gao S, et al., 2019, A support interface method for easy part removal in direct metal deposition. Manuf Lett, 20: 30–33.


Aduba DC, Margaretta ED, Marnot AE, et al., 2019, Vat photopolymerization 3D printing of acid-cleavable PEG-methacrylate networks for biomaterial applications. Mater Today Commun, 19: 204–211.


Cooper KG, 2001, Rapid prototyping technology: Selection and application. Assem Autom, 21: 358–359.


Pham DT, Ji C, 2000, Design for stereolithography. Proc Inst Mech Eng Part C J Mech Eng Sci, 214: 635–640.


Himmer T, Nakagawa T, Anzai M, 1999, Lamination of metal sheets. Comput Ind, 39: 27–33.


Nohut S, Schwentenwein M, 2022, Vat photopolymerization additive manufacturing of functionally graded materials: A review. J Manuf Mater Process, 6: 17.


Xu X, Awad A, Robles-Martinez P, et al., 2021, Vat photopolymerization 3D printing for advanced drug delivery and medical device applications. J Control Release, 329: 743–757.


Luo Z, Zhao Y, 2018, A survey of finite element analysis of temperature and thermal stress fields in powder bed fusion additive manufacturing. Addit Manuf, 21: 318–332.


McCann R, Obeidi MA, Hughes C, et al., 2021, In-situ sensing, process monitoring and machine control in laser powder bed fusion: A review. Addit Manuf, 45: 102058.


Wickramasinghe S, Do T, Tran P, 2020, FDM-Based 3D printing of polymer and associated composite: A review on mechanical properties, defects and treatments. Polymers, 12: 1529.


Dey A, Yodo N, 2019, A systematic survey of FDM process parameter optimization and their influence on part characteristics. J Manuf Mater Process, 3: 64.


Ziaee M, Crane NB, 2019, Binder jetting: A review of process, materials, and methods. Addit Manuf, 28: 781–801.


Pagac M, Hajnys J, Ma QP, et al., A review of vat photopolymerization technology: Materials, applications, challenges, and future trends of 3D printing. Polymers,13: 598.


Gülcan O, Günaydın K, Tamer A, 2021, The state of the art of material jetting-a critical review. Polymers(Basel), 13: 2829.


Grasso M, Colosimo BM, 2017, Process defects and in situ monitoring methods in metal powder bed fusion: A review. Meas Sci Technol, 28: 044005.


Dass A, Moridi A, 2019, State of the art in directed energy deposition: From additive manufacturing to materials design. Coatings, 9: 418.


Ahn DG, 2021, Directed energy deposition (DED) process: State of the art. Int J Precis Eng Manuf Technol, 8: 703–742.


Chartrain NA, Williams CB, Whittington AR, 2018, A review on fabricating tissue scaffolds using vat photopolymerization. Acta Biomater, 74: 90–111.


Andreu A, Su PC, Kim JH, et al., 2021, 4D printing materials for vat photopolymerization. Addit Manuf, 44: 102024.


Maurel A, Martinez AC, Grugeon S, et al., 2021, Toward high resolution 3D Printing of shape-conformable batteries via vat photopolymerization: Review and perspective. IEEE Access, 9: 140654–140666.


Shaukat U, Rossegger E, Schlögl S, 2022, A review of multi-material 3D Printing of functional materials via vat photopolymerization. Polymers, 14: 2449.


Bartlett JL, Li X, 2019, An overview of residual stresses in metal powder bed fusion. Addit Manuf, 27 (2019) 131–149.


Chatham CA, Long TE, Williams CB, A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing. Prog Polym Sci, 93: 68–95.


Aversa A, Marchese G, Saboori A, et al., 2019, New Aluminum alloys specifically designed for laser powder bed fusion: A review. Materials (Basel), 12: 1007.


Dowling L, Kennedy J, O’Shaughnessy S, et al., 2020, A review of critical repeatability and reproducibility issues in powder bed fusion. Mater Des, 186: 108346.


Snow Z, Nassar AR, Reutzel EW, 2020, Invited review article: Review of the formation and impact of flaws in powder bed fusion additive manufacturing. Addit Manuf, 36: 101457.


Awad A, Fina F, Goyanes A, et al., 2021, Advances in powder bed fusion 3D printing in drug delivery and healthcare. Adv Drug Deliv Rev, 174: 406–424.


Mirzababaei S, Pasebani S, 2019, A review on binder jet additive manufacturing of 316L stainless steel. J Manuf Mater Process, 3: 82.


Goh GD, Yap YL, Tan HK, et al., 2019, Process-structure-properties in polymer additive manufacturing via material extrusion: A review. Crit Rev Solid State Mater Sci, 45: 113–133.


Spoerk M, Holzer C, Gonzalez-Gutierrez J, 2020, Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage. J Appl Polym Sci, 137: 48545.


Brenken B, Barocio E, Favaloro A, et al., 2018, Fused filament fabrication of fiber-reinforced polymers: A review. Addit Manuf, 21: 1–16.


Chaunier L, Guessasma S, Belhabib S, et al., 2018, Material extrusion of plant biopolymers: Opportunities and challenges for 3D printing. Addit Manuf, 21: 220–233.


Huang J, Chen Q, Jiang H, et al., 2020, A survey of design methods for material extrusion polymer 3D printing. Virtual Phys Prototyp, 15: 148–162.


Lamm ME, Wang L, Kishore V, et al., 2020, Material extrusion additive manufacturing of wood and lignocellulosic filled composites. Polymers (Basel), 12: 2115.


Oleff A, Küster B, Stonis M, et al., 2021, Process monitoring for material extrusion additive manufacturing: A state-of-the-art review. Prog Addit Manuf, 64: 705–730.


Rowat SJ, Legge RL, Moresoli C, 2021, Plant protein in material extrusion 3D printing: Formation, plasticization, prospects, and challenges. J Food Eng, 308: 110623.


Saboori A, Aversa A, Marchese G, et al., 2019, Application of directed energy deposition-based additive manufacturing in repair. Appl Sci, 9: 3316.


Tang ZJ, Liu WW, Wang YW, et al., 2020, A review on in situ monitoring technology for directed energy deposition of metals. Int J Adv Manuf Technol, 108: 3437–3463.


Xu J, Gu X, Ding D, et al., 2018, A review of slicing methods for directed energy deposition based additive manufacturing. Rapid Prototyp J, 24: 1012–1025.


Wang H, Liu W, Tang Z, et al., 2020, Review on adaptive control of laser-directed energy deposition. Optic Eng, 59: 070901.


Kim KH, Jung CH, Jeong DY, et al., 2021, Preventing evaporation products for high-quality metal film in directed energy deposition: A review. Metals, 11: 353.


Singh N, Hameed P, Ummethala R, et al., 2020, Selective laser manufacturing of Ti-based alloys and composites: Impact of process parameters, application trends, and future prospects. Mater Today Adv, 8: 100097.


Teixeira O, Silva FJ, Ferreira LP, et al., A review of heat treatments on improving the quality and residual stresses of the Ti-6Al-4V parts produced by additive manufacturing. Metals, 10: 1006.


Frazier WE, 2014, Metal additive manufacturing: A review. J Mater Eng Perform, 23: 1917–1928.


Sames WJ, List FA, Pannala S, et al., The metallurgy and processing science of metal additive manufacturing. 61 (2016) 315–360.


Deckers J, Vleugels J, Kruth JP, 2014, Additive manufacturing of ceramics: A review. J Ceram Sci Technol, 5: 245–260.


Sing SL, Yeong WY, Wiria FE, et al., 2017, Direct selective laser sintering and melting of ceramics: A review. Rapid Prototyp J, 23: 611–623.


Ligon SC, Liska R, Stampfl J, et al., 2017, Polymers for 3D printing and customized additive manufacturing. Chem Rev, 117: 10212–10290. IMAGES/LARGE/CR-2017-00074G_0037.JPEG


Kong D, Dong C, Wei S, et al., 2021, About metastable cellular structure in additively manufactured austenitic stainless steels. Addit Manuf, 38: 101804.


Jin W, Zhang C, Jin S, et al., 2020, Wire arc additive manufacturing of stainless steels: A review. Appl Sci, 10: 1563.


Attallah MM, Jennings R, Wang X, et al., 2016, Additive manufacturing of Ni-based superalloys: The outstanding issues. MRS Bull, 41: 758–764.


Shipley H, McDonnell D, Culleton M, et al., 2018, Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review. Int J Mach Tools Manuf, 128: 1–20.


Murphy SV, Atala A, 2014, 3D bioprinting of tissues and organs. Nat Biotechnol, 32: 773–785.


Buswell RA, de Silva WR, Jones SZ, et al., 2018, 3D printing using concrete extrusion: A roadmap for research. Cem Concr Res, 112: 37–49.


Parandoush P, Lin D, 2017, A review on additive manufacturing of polymer-fiber composites. Compos Struct, 182: 36–53.


Bandyopadhyay A, Heer B, Additive manufacturing of multi-material structures. Mater Sci Eng R Reports, 129: 1–16.


Perez AR, Roberson DA, Wicker RB, 2014, Fracture surface analysis of 3D-printed tensile specimens of novel ABS-based materials. J Fail Anal Prev, 14: 343–353.


Ilyas RA, Sapuan SM, Harussani MM, et al., 2021, Polylactic acid (PLA) biocomposite: Processing, additive manufacturing and advanced applications. Polymers, 13: 1326.


Zanjanijam AR, Major I, Lyons JG, et al., Fused filament fabrication of PEEK: A review of process-structure-property relationships. Polymers, 12: 1665.


Aboulkhair NT, Simonelli M, Parry L, et al., 2019, 3D printing of aluminium alloys: Additive manufacturing of aluminium alloys using selective laser melting. Prog Mater Sci, 106: 100578.


Tran TQ, Chinnappan A, Lee JK, et al., 2019, 3D printing of highly pure copper. Metals, 9: 756.


Godoi FC, Prakash S, Bhandari BR, 3D printing technologies applied for food design: Status and prospects. J Food Eng, 179: 44–54.


Mendes-Felipe C, Oliveira J, Etxebarria I, et al., 2019, State-of-the-art and future challenges of UV curable polymer-based smart materials for printing technologies. Adv Mater Technol, 4: 1800618.


Zhang D, Liu X, Qiu J, 2020, 3D printing of glass by additive manufacturing techniques: A review. Front Optoelectron, 14: 263–277.


Madhavadas V, Srivastava D, Chadha U, et al., 2022, A review on metal additive manufacturing for intricately shaped aerospace components. CIRP J Manuf Sci Technol, 39: 18–36.


Ramkumar P, Rijwani T, 2022, Additive manufacturing of metals and ceramics using hybrid fused filament fabrication. J Braz Soc Mech Sci Eng, 44: 1–17.


Fu J, Li H, Song X, et al., 2022, Multi-scale defects in powder-based additively manufactured metals and alloys. J Mater Sci Technol, 122: 165–199.


Uralde V, Veiga F, Aldalur E, et al., 2022, Symmetry and its application in metal additive manufacturing (MAM). Symmetry, 14: 1810.


Muthuswamy P, 2022, Influence of powder characteristics on properties of parts manufactured by metal additive manufacturing. Lasers Manuf Mater Process, 9: 312–337.


Phua A, Davies CH, Delaney GW, 2022, A digital twin hierarchy for metal additive manufacturing. Comput Ind, 140: 103667.


Zhou R, Liu H, Wang H, 2022, Modeling and simulation of metal selective laser melting process: A critical review. Int J Adv Manuf Technol, 121: 5693–5706.


Sefene EM, Hailu YM, Tsegaw AA, 2022, Metal hybrid additive manufacturing: State-of-the-art. Prog Addit Manuf, 7; 737–749.


Zhang R, Jiang F, Xue L, Yu J, 2022, Review of additive manufacturing techniques for large-scale metal functionally graded materials. Crystals, 12: 858.


Chaghazardi Z, Wüthrich R, 2022, Review-electropolishing of additive manufactured metal parts. J Electrochem Soc, 169: 043510.


Mostafaei A, Zhao C, He Y, et al., 2022, Defects and anomalies in powder bed fusion metal additive manufacturing. Curr Opin Solid State Mater Sci, 26: 100974.


Avateffazeli M, Haghshenas M, 2022, Ultrasonic fatigue of laser beam powder bed fused metals: A state-of-the-art review. Eng Fail Anal, 134: 106015.


Fu Y, Downey AR, Yuan L, et al., 2022, Machine learning algorithms for defect detection in metal laser-based additive manufacturing: A review. J Manuf Process, 75: 693–710.


Liu Z, Zhao D, Wang P, et al., 2022, Additive manufacturing of metals: Microstructure evolution and multistage control. J Mater Sci Technol, 100: 224–236.


Selema A, Ibrahim MN, Sergeant P, 2022, Metal additive manufacturing for electrical machines: Technology review and latest advancements. Energies, 15: 1076.


Hashmi AW, Mali HS, Meena A, et al., 2022, Surface characteristics improvement methods for metal additively manufactured parts: A review. Adv Mater Process Technol.


Bandyopadhyay A, Ciliveri S, Bose S, 2022, Metal additive manufacturing for load-bearing implants. J Indian Inst Sci, 1021: 561–584.


Zhang K, Qu H, Guan H, et al., 2021, Design and fabrication technology of metal mirrors based on additive manufacturing: A review. Appl Sci, 11: 10630.


Grasso M, Remani A, Dickins A, et al., 2021, In-situ measurement and monitoring methods for metal powder bed fusion: An updated review. Meas Sci Technol, 32: 112001.


Becker TH, Kumar P, Ramamurty U, 2021, Fracture and fatigue in additively manufactured metals. Acta Mater, 219: 117240.


Ladani LJ, 2021, Applications of artificial intelligence and machine learning in metal additive manufacturing. J Phys Mater, 4: 042009.


Gunasegaram DR, Murphy AB, Matthews MJ, et al., 2021, The case for digital twins in metal additive manufacturing. J Phys Mater, 4: 040401.


Ye C, Zhang C, Zhao J, et al., 2021, Effects of post-processing on the surface finish, porosity, residual stresses, and fatigue performance of additive Manufactured metals: A review. J Mater Eng Perform, 30: 6407–6425.


Velásquez-García LF, Kornbluth Y, 2021, Biomedical applications of metal 3D printing. Annu Rev Biomed Eng, 23: 307–338.


Mooraj S, Qi Z, Zhu C, et al., 2020, 3D printing of metal-based materials for renewable energy applications. Nano Res, 14: 2105–2132.


Ansell TY, 2021, Current status of liquid metal printing. J Manuf Mater Process, 5: 31.


Sing SL, Kuo CN, Shih CT, et al., 2021, Perspectives of using machine learning in laser powder bed fusion for metal additive manufacturing. Virtual Phys Prototyp, 16: 372–386.


Galante R, Figueiredo-Pina CG, Serro AP, 2019, Additive manufacturing of ceramics for dental applications: A review. Dent Mater, 35: 825–846.


Du X, Fu S, Zhu Y, 2018, 3D printing of ceramic-based scaffolds for bone tissue engineering: An overview. J Mater Chem B, 6: 4397–4412.


He R, Zhou N, Zhang K, et al., 2021, Progress and challenges towards additive manufacturing of SiC ceramic. J Adv Ceram, 10: 637–674.


Pinargote NW, Smirnov A, Peretyagin N, et al., 2020, Direct ink writing technology (3D printing) of graphene-based ceramic nanocomposites: A review. Nanomater, 10: 1300.


Dommati H, Ray SS, Wang JJ, et al., 2019, A comprehensive review of recent developments in 3D printing technique for ceramic membrane fabrication for water purification. RSC Adv, 9: 16869–16883.


Pelanconi M, Rezaei E, Ortona A, 2020, Cellular ceramic architectures produced by hybrid additive manufacturing: A review on the evolution of their design. J Ceram Soc Japan, 128: 595–604.


Dizon JR, Espera JH, Chen Q, et al., 2018, Mechanical characterization of 3D-printed polymers. Addit Manuf, 20: 44–67.


De Leon AC, Chen Q, Palaganas NB, et al., High performance polymer nanocomposites for additive manufacturing applications. React Funct Polym, 103: 141–155.


Manapat JZ, Chen Q, Ye P, et al., 2017, 3D Printing of polymer nanocomposites via stereolithography. Macromol Mater Eng, 302: 1600553.


Balla VK, Kate KH, Satyavolu J, et al., 2019, Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects. Compos Part B Eng, 174: 106956.


Bracaglia LG, Smith BT, Watson E, et al., 3D printing for the design and fabrication of polymer-based gradient scaffolds. Acta Biomater, 56: 3–13.


Ettefagh AH, Guo S, Raush J, 2021, Corrosion performance of additively manufactured stainless steel parts: A review. Addit Manuf, 37: 101689.


Ko G, Kim W, Kwon K, et al., 2021, The corrosion of stainless steel made by additive manufacturing: A review. Metals, 11: 516.


Eshkabilov S, Ara I, Sevostianov I, et al., 2021, Mechanical and thermal properties of stainless steel parts, manufactured by various technologies, in relation to their microstructure. Int J Eng Sci, 159: 103398.


Klapczynski V, Le Maux D, Courtois M, et al., 2022, Surface tension measurements of liquid pure iron and 304L stainless steel under different gas mixtures. J Mol Liq, 350: 118558.


Yuan X, Guo X, Qiu H, et al., 2022, Mechanical properties and microstructure of 316 stainless steel processed by pulsed micro-plasma additive manufacturing. J Therm Spray Technol, 31: 623–635.


Voisin T, Shi R, Zhu Y, et al., 2022, Pitting corrosion in 316L stainless steel fabricated by laser powder bed fusion additive manufacturing: A review and perspective. JOM, 74: 1668–1689.


Douglas R, Lancaster R, Jones T, et al., 2022, The influence of powder reuse on the properties of laser powder bed-fused stainless steel 316L: A review. Adv Eng Mater, 24: 2200596.


Nedjad HS, Yildiz M, Saboori A, 2022, Solidification behaviour of austenitic stainless steels during welding and directed energy deposition. Sci Technol Welding Join, 27: 8.


Shao S, Khonsari MM, Guo S, et al., 2019, Overview: Additive manufacturing enabled accelerated design of ni-based alloys for improved fatigue life. Addit Manuf, 29: 100779.


Haines MP, Rielli VV, Primig S, et al., 2022, Powder bed fusion additive manufacturing of Ni-based superalloys: A review of the main microstructural constituents and characterization techniques. J Mater Sci, 57: 14135–14187.


Markanday JFS, 2022, Applications of alloy design to cracking resistance of additively manufactured Ni-based alloys. Mater Sci Tech, 38: 1300–1314.


Guo C, Li G, Li S, et al., 2022, Additive Manufacturing of Ni-based superalloys: In: Residual stress, Mechanisms of Crack Formation and Strategies for Crack Inhibition, Nano Material Science. In Press.


Qian M, Xu W, Brandt M, et al., Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties. MRS Bull, 41: 775–784.


Agius D, Kourousis KI, Wallbrink C, 2018, A review of the As-built SLM Ti-6Al-4V mechanical properties towards achieving fatigue resistant designs. Metals, 8: 75.


Harun WS, Manam NS, Kamariah MS, et al., 2018, A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications. Powder Technol, 331: 74–97.


Lyczkowska E, Szymczyk P, Dybała B, et al., 2014, Chemical polishing of scaffolds made of Ti-6Al-7Nb alloy by additive manufacturing. Arch Civ Mech Eng, 14: 586–594.


Tong J, Bowen CR, Persson J, 2016, Plummer, mechanical properties of titanium-based Ti–6Al–4V alloys manufactured by powder bed additive manufacture. Mater Sci Tech, 33: 138–148.


Carolo L, Ordoñez RE, 2022, A review on the influence of process variables on the surface roughness of Ti-6Al-4V by electron beam powder bed fusion. Addit Manuf, 59: 103103.


Hölzl K, Lin S, Tytgat L, et al., 2016, Bioink properties before, during and after 3D bioprinting. Biofabrication, 8: 032002.


Derakhshanfar S, Mbeleck R, Xu K, et al., 2018, 3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances. Bioact Mater, 3: 144–156.


Schwab A, Levato A, D’Este M, et al., 2020, Printability and shape fidelity of bioinks in 3D bioprinting. Chem Rev, 120: 11028–11055. IMAGES/LARGE/CR0C00084_0009.JPEG


Lee JM, Yeong WY, Lee JM, et al., 2016, Design and printing strategies in 3D bioprinting of cell-hydrogels: A review. Adv Healthc Mater, 5: 2856–2865.


Vijayavenkataraman S, Lu WF, Fuh JY, 2016, 3D bioprinting of skin: A state-of-the-art review on modelling, materials, and processes. Biofabrication, 8: 032001.


Pereira RF, Bártolo PJ, 2015, 3D bioprinting of photocrosslinkable hydrogel constructs. J Appl Polym Sci, 132: 42458.


Alonzo M, AnilKumar S, Roman B, et al., 2019, 3D Bioprinting of cardiac tissue and cardiac stem cell therapy. Transl Res, 211: 64–83.


Yu C, Jiang J, 2020, A Perspective on using machine learning in 3D bioprinting. Int J Bioprinting, 6: 4–11.


Fetah K, Tebon P, Goudie MJ, et al., 2019, The emergence of 3D bioprinting in organ-on-chip systems. Prog Biomed Eng, 1: 012001.


Kryou C, Leva V, Chatzipetrou M, et al., 2019, Bioprinting for liver transplantation. Bioengineering, 6: 95.


Adhikari J, Roy A, Das A, et al., 2021, Effects of processing parameters of 3D bioprinting on the cellular activity of bioinks. Macromol Biosci, 21: 2000179.


Roussel N, Spangenberg J, Wallevik J, et al., 2020, Numerical simulations of concrete processing: From standard formative casting to additive manufacturing. Cem Concr Res, 135: 106075.


Valente M, Sibai A, Sambucci M, 2019, Extrusion-based additive manufacturing of concrete products: Revolutionizing and remodeling the construction industry. J Compos Sci, 3: 88.


Du Plessis A, Babafemi AJ, Paul SC, et al., Biomimicry for 3D concrete printing: A review and perspective. Addit Manuf, 38: 101823.


Ahmed ZY, Bos FP, van Brunschot MC, et al., 2020, On-demand additive manufacturing of functionally graded concrete. Virtual Phys Prototyp, 15: 194–210.


van de Werken N, Tekinalp H, Khanbolouki P, et al., 2020, Additively manufactured carbon fiber-reinforced composites: State of the art and perspective. Addit Manuf, 31: 100962.


Li M, Pu Y, Thomas VM, et al., 2020, Recent advancements of plant-based natural fiber–reinforced composites and their applications. Compos Part B Eng, 200: 108254.


Shanmugam V, Rajendran DJ, Babu K, et al., 2021, The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing. Polym Test, 93: 106925.


Ferreira I, Machado M, Alves F, et al., 2019, A review on fibre reinforced composite printing via FFF. Rapid Prototyp J, 25: 972–988.


Ramesh M, Rajeshkumar L, Balaji D, 2021, Influence of process parameters on the properties of additively manufactured fiber-reinforced polymer composite Materials: A review. J Mater Eng Perform, 30: 4792–4807.


Goh GL, Zhang H, Chong TH, et al., 2021, 3D Printing of multilayered and multimaterial electronics: A review. Adv Electron Mater, 7: 2100445.


Mehrpouya M, Tuma D, Vaneker T, et al., 2022, Multimaterial powder bed fusion techniques. Rapid Prototyp J, 28: 1–19.


Rocha VG, Saiz E, Tirichenko IS, et al., 2020, Direct ink writing advances in multi-material structures for a sustainable future. J Mater Chem A, 8: 15646–15657.


Pajonk A, Prieto A, Blum U, et al., Multi-material additive manufacturing in architecture and construction: A review. J Build Eng, 45: 103603.


García-Collado A, Blanco JM, Gupta MK, et al., 2022, Advances in polymers based multi-material additive-manufacturing techniques: State-of-art review on properties and applications. Addit Manuf, 50: 102577.


Peterson AM, 2019, Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective. Addit Manuf, 27: 363–371.


Chen X, Chen G, Wang G, et al., Recent progress on 3D-printed polylactic acid and its applications in bone repair. Adv Eng Mater, 22: 1901065.


Mehrpouya M, Vahabi H, Janbaz S, et al., 2021, 4D printing of shape memory polylactic acid (PLA). Polymer (Guildf), 230: 124080.


Cojocaru V, Frunzaverde V, Miclosina CO, et al., 2022, The influence of the process parameters on the mechanical properties of PLA specimens produced by fused filament fabrication— A review. Polymers, 14: 886.


El Magri A, Vanaei S, Vaudreuil S, 2021, An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts. High Performance Polym, 33: 862–880.


Dua R, Rashad Z, Spears J, et al., Applications of 3D-printed PEEK via fused filament fabrication: A systematic review. Polymers, 13: 4046.


Ding Y, Muñiz-Lerma JA, Trask M, et al., 2016, Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys. MRS Bull, 41: 745–751.


Ponnusamy P, Rashid RA, Masood SH, et al., 2020, Mechanical properties of SLM-printed aluminium alloys: A review. Materials, 13: 4301.


Fiocchi J, Tuissi A, Biffi CA, 2021, Heat treatment of aluminium alloys produced by laser powder bed fusion: A review. Mater Des, 204: 109651.


Thapliyal S, 2019, Challenges associated with the wire arc additive manufacturing (WAAM) of aluminum alloys. Mater Res Express, 6: 112006.


Revilla RI, Verkens D, Rubben T, et al., 2020, Corrosion and corrosion protection of additively manufactured aluminium alloys-a critical review. Materilas, 13: 4804.


Jiang Q, Zhang P, Yu Z, et al., 2021, A review on additive manufacturing of pure copper. Coatings, 11: 740.


Portanguen S, Tournayre P, Sicard J, et al., 2019, Toward the design of functional foods and biobased products by 3D printing: A review. Trends Food Sci Technol, 86: 188–198.


Wang M, Li D, Zang Z, et al., 2021, 3D food printing: Applications of plant-based materials in extrusion-based food printing. Crit Rev Food Sci Nutr, 6: 7184–7198.


Li G, Hu L, Liu J, et al.,2022, A review on 3D printable food materials: Types and development trends. Int J Food Sci Technol, 57: 164–172.


Navaf M, Sunooj KV, Aaliya B, et al., 2022, 4D printing: A new approach for food printing; effect of various stimuli on 4D printed food properties. A comprehensive review. Appl Food Res, 2: 100150.


Haleem A, Javaid M, Singh RP, et al., 2021, Significant roles of 4D printing using smart materials in the field of manufacturing. Adv Ind Eng Polym Res, 4: 301–311.


Kwon JY, Park HE, Park YB, et al., 2017, Potentials of additive manufacturing with smart materials for chemical biomarkers in wearable applications. Int J Precis Eng Manuf Technol, 4: 335–347.


Liu H, Jiang Q, Huo J, et al., 2020, Crystallization in additive manufacturing of metallic glasses: A review. Addit Manuf, 36: 101568.


Zhang H, Huang L, Tan M, et al., Overview of 3D-printed silica glass. Micromachines, 13: 81.


Das AK, Agar DA, Rudolfsson M, et al., 2021, A review on wood powders in 3D printing: Processes, properties and potential applications. J Mater Res Technol, 15: 241–255.


Wang C, Tan XP, Tor SB, et al., 2020, Machine learning in additive manufacturing: State-of-the-art and perspectives. Addit Manuf, 36: 101538.


Liu J, Gaynor AT, Chen S, et al., 2018, Current and future trends in topology optimization for additive manufacturing. Struct Multidiscip Optim, 57: 2457–2483.


Ambrosi A, Pumera M, 2016, 3D-printing technologies for electrochemical applications. Chem Soc Rev, 45: 2740–2755.


Truby Rl, Lewis JA, 2016, Printing soft matter in three dimensions. Nature, 540: 371–378.


Trenfield SJ, Awad A, Goyanes A, et al., 3D printing pharmaceuticals: Drug development to frontline care. Trends Pharmacol Sci, 39: 440–451.


Uriondo A, Esperon-Miguez M, Perinpanayagam S, 2022, The present and future of additive manufacturing in the aerospace sector: A review of important aspects. Proceed Inst Mech Eng G J Aerospace Eng, 229: 2132–2147.

Back to top
Materials Science in Additive Manufacturing, Electronic ISSN: 2810-9635 Print ISSN: TBA, Published by AccScience Publishing