3D food printing—An innovative way of mass customization in food fabrication
About 15-25% of aging population suffers from swallowing difficulties, and this creates an increasing market need for food mass customization. Food industry is investigating mass customization techniques to meet individual needs on taste, nutrition and mouthfeel. Three dimensional (3D) food printing is a potential solution to overcome drawbacks of current food customization techniques such as lower production efficiency and high manufacturing cost. This study introduces the first generation food printer concept designs and functional prototypes that target to revolutionize customized food fabrication by 3D printing (3DP). Different from robotics-based food manufacturing technologies designed to automate manual processes for mass production, 3D food printing integrates 3DP and digital gastronomy technique to customize food products. This introduces artistic capabilities into domestic cooking, and extends customization capabilities to industrial culinary sector. Their applications in domestic cooking or catering services can not only provide an engineering solution for customized food design and personalized nutrition control, but also have potential to reconfigure customized food supply chains.
In this paper, the selected prototypes are reviewed based on fabrication platforms and printing materials. A detailed discussion on specific 3DP technologies and their associate dispensing/printing process for 3D customized food fabrication with single and multi-material applications are reported. Lastly, impacts of food printing on customized food fabrication, personalized nutrition, food supply chain, and food processing technologies are reported and discussed.
1.Luimstra J, 2014, EU Works on Food Printer to Create Personalized Meals for the Elderly, 3Dprinting.com, viewed May 11, 2015, <http://3dprinting.com/news/eufoodprinter/>.
2. Gray N, 2010, Looking to the future: Creating novel foods using 3D printing, FoodNavigator.com, viewed May 1, 2015, <http://www.foodnavigator.com/Science-Nutrition/Looking -to-the-future-Creating-novel-foods-using-3D-printing >.
3. Sloan D, 2011, 3 Ways to Customize Your Food Online, Mashable, viewed May 1, 2015, <http://mashable.com/2011/01/24/customize-food-online/ >.
4. Wegrzyn T F, Golding M and Archer RH, 2012, Food Layered Manufacture: A new process for constructing solid foods. Trends in Food Science & Technology, vol. 27(2): 66–72. http://dx.doi.org/10.1016/j.tifs.2012.04.006.
5. Bollini M, Barry J and Rus D, 2011, Bakebot: Baking cookies with the pr2, in The PR2 Workshop: Results, Challenges and Lessons Learned in Advancing Robots with a Common Platform, IROS.
6. Beetz M, Klank U and Kresse I, 2011, Robotic roommates making pancakes, in 11th IEEE-RAS International Conference on Humanoid Robots.
7. Winger R and Wall G, 2006, Food product innovation: A back ground paper, viewed May 29, 2015, <http://www.fao.org/docrep/016/j7193e/j7193e.pdf >.
8. Levy G, Schindel R and Kruth J, 2003, Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies: state of the art and future perspectives. CIRP Annals-Manufacturing Technology, vol.52(2): 589–609.
9. Van Bommel K and Spicer A, 2011, Hail the snail: hegemonic struggles in the slow food movement. Organization Studies, vol.32(12): 1717–1744. http://dx.doi.org/10.1016/S0007-8506(07)60206-6.
10. Yang J, Wu L and Liu J, 2001, Rapid prototyping and fabrication method for 3-D food objects, US Patent 6280785 B1.
11. Kläber N, 2009, Interview with Nico Kläber (Moléculaire) Electrolux Design Lab finalist, viewed December1, 2014, .<http://group.electrolux.com/en/interview-with-nico-klaber-moleculaire-electrolux-design-lab-finalist-2040/ >
12. Philips Design Probes, image downloads — FOOD, 2008, viewed May 1, 2015, .<http://www.design.philips.com/philips/sites/philipsdesi
gn/about/design/designportfolio/design_futures/design_probes/downloads/food.page >
13. Zoran A and Coelho M, 2011, Cornucopia: the concept of digital gastronomy. Leonardo, vol.44(5): 425–431.
14. Malone E and Lipson H, 2007, Fab@ Home: the personal desktop fabricator kit. Rapid Prototyping Journal, vol.13(4): 245–255. http://dx.doi.org/10.1162/LEON_a_00243.
15. Millen C I, 2012, The development of colour 3D food printing system, Master thesis, Massey University, Palmerston North, New Zealand. http://dx.doi.org/10.1108/13552540710776197.
16. Oskay W H, 2007, Solid Freeform Fabrication: DIY, on the cheap, and made of pure sugar, viewed May 1, 2015, .
17. Hao L, Mellor S, Seaman O, et al. 2010, Material characterisation and process development for chocolate additive layer manufacturing. Virtual and Physical Prototyping, vol.5(2): 57–64.
18. The CandyFab Project, 2007, viewed December 14, 2014, http://dx.doi.org/10.1080/17452751003753212. .
19. Lipton J I, Arnold D, Nigl F, et al. 2010, Multi-material food printing with complex internal structure suitable for conventional post-processing, in Solid Freeform Fabrication Symposium, Austin TX, USA.
20. 2013, 3D Printing: Food in Space, NASA, n.d., viewed May 27, 2015, .<http://www.nasa.gov/directorates/spacetech/home/feature_3d_food.html#.VWfTnc-qpBc>
21. Cohen D L, Lipton J I, Cutler M, et al. 2009, Hydrocolloid Printing: A Novel Platform for Customized Food Production, in Solid Freeform Fabrication Symposium (SFF’09), Austin, TX, USA. 22. Southerland D, Walters P and Huson D, 2011, Edible 3D Printing, in NIP & Digital Fabrication Conference, Minnesota, USA.
23. MIT, Fabaroni: A homemade 3D printer, n.d., viewed December 29, 2014,<http://fab.cba.mit.edu/classes/MIT/863.07/11.05/fabaroni/>.
24. Soares S, 2011, Insects au gratin, viewed May 11, 2015,<http://www.susanasoares.com/index.php?id=79>.
25. Deckard C and Beaman J, 1988, Process and control is-sues in selective laser sintering, American Society of Mechanical Engineers, Production Engineering Division (Publication) PED, vol.33: 191–197.
26. Crump S S, 1991, Fast, Precise, Safe Prototypes with FDM in ASME Annual Winter Conference, Atlanta.
27. Causer C, 2009, They’ve got a golden ticket, Potential,IEEE, vol.28(4): 42–44.
28. Coelho M, Zoran A, Nelson Z, et al. 2011, Cornucopia -Digital Chocolatier Prototype, Marcelo Coelho Studio,viewed May 22, 2015,
<http://dx.doi.org/10.1109.MPOT.2009.933608.
29. Golding M, Archer R, Gupta G, et al. 2011, Design and development of a 3-D food printer, in In Proceedings of NZIFST 2011 Conference, Rotorua, New Zealand. <http://www.cmarcelo.com/#/cornucopia/>.
30. Sachs E, Cima M and Cornie J, 1990, Three dimensional printing: rapid tooling and prototypes directly from a CAD model. CIRP Annals-ManufacturingTechnology, vol.39(1): 201–204.
31. 3D Systems Acquires The Sugar Lab, 3D Systems, 2013, viewed December 22, 2014,<http://www.3dsystems.com/de/press-releases/3d-syste
ms-acquires-sugar-lab>.
32. Foodjet n.d., viewed December 1, 2014,<http://foodjet.nl/>.
33. Choc Edge n.d., 2014, viewed December 2014,<http://chocedge.com/>.
34. 3D Systems, ChelfJet,2014, viewed May 1, 2015,<http://www.3dsystems.com/chefjet >.
35. Periard D, Schaal N and Schaal M, 2007, Printing Food, in In Proceedings of the 18th Solid Freeform. Austin TX,USA.
36. Watzke H and German J, 2010, Personalizing foods, in An integrated approach to new food product development. Boca Raton, US, 133–173.