AccScience Publishing / GTI / Online First / DOI: 10.36922/gti.8110
Submit to GTI
Cite this article
34
Download
707
Views
Journal Browser
Volume | Year
Issue
Search
Forthcoming Issue
Current Issue
View All
News and Announcements
View All
ARTICLE

Implementation of sustainable refrigeration technology with phase-change material storage at rural communities in Kampung Labang, Bintulu Sarawak, Malaysia: A case study

Hasila Jarimi1,2* ,  Yanan Zhang2 ,  Nik Aida Mastura Abdul Majid3 ,  Wan Mohamad Fadhli Wan Mohamed4 ,  Kezie Matusup4 ,  Saffa Riffat2
Show Less
1 Solar Energy Research Institute, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
2 Department of Architecture and Built Environment, The University of Nottingham, University Park, Nottingham, NG7 2RD, United Kingdom
3 School of Education, Universiti Kebangsaan Malaysia, 43600, Bangi, Selangor, Malaysia
4 Sekolah Kebangsaan Labang, Bintulu, Sarawak, Malaysia
GTI 2025, 1(1), 8110 https://doi.org/10.36922/gti.8110
Received: 21 December 2024 | Revised: 4 February 2025 | Accepted: 5 March 2025 | Published online: 4 April 2025
© 2025 by the Author(s). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International License ( https://creativecommons.org/licenses/by/4.0/ )
Download PDF
Cite
XML
Abstract

Solar-powered refrigeration is a promising solution for ensuring sustainable access to cooling in areas with weak or off-grid electricity supply. However, conventional solar-powered fridges rely heavily on high-cost electrical battery storage and photovoltaic (PV) panels, which limit their economic feasibility in many rural settings. To address these challenges and reduce reliance on electrical storage, phase-change materials (PCMs) have been introduced as a viable thermal energy storage solution. A PCM system can be more energy-efficient than conventional solar-powered fridges because it stores excess cooling during the day and releases it during night-time or cloudy conditions. This leads to reduced dependence on electrical batteries, which are typically a major cost driver in solar refrigeration systems. Experimental validation demonstrated that PCM packs maintained an average temperature of 6.73°C in the chiller and −5°C in the freezer during low or zero solar irradiance, outperforming conventional solar-powered fridges with the same electrical battery and PV panel arrangement. The integration of PCM reduced the levelized cost of cooling to 27 cents USD/kWh, or 70% lower than conventional solar-powered fridges. In addition, this study uniquely combines technical advancements with social engagement by involving end-users through pre-installation analysis and semi-structured interviews, ensuring the system’s relevance, practicality, and acceptance. These findings highlight the importance of integrating both technical and social perspectives to accelerate the adoption and implementation of sustainable cooling technologies in off/weak-grid areas.

Keywords
Rural refrigeration
Solar PV
PCM storage
Low-cost PCM
Real case study
Funding
This project was supported by the South and Southeast Asia Research Hub, Foreign, Commonwealth and Development Office (FCDO), Government of United Kingdom, and Universiti Kebangsaan Malaysia under research grant RS 2024_001.
Conflict of interest
The authors declare that they have no competing interests.
References
  1. International Institute of Refrigeration. The Carbon Footprint of the Cold Chain: 7th Informatory Note on Refrigeration and Food. France: International Institute of Refrigeration; 2021. doi: 10.18462/iir.INfood07.04.2021

 

  1. Karoney EM, Molelekoa T, Bill M, Siyoum N, Korsten L. Global research network analysis of fresh produce postharvest technology: Innovative trends for loss reduction. Postharvest Biol Technol. 2024;208:112642. doi: 10.1016/j.postharvbio.2023.112642

 

  1. Amjad W, Munir A, Akram F, et al. Decentralized Solar- Powered Cooling Systems for Fresh Fruit and Vegetables to Reduce Post-Harvest Losses in Developing Regions: A Review. Oxford: Oxford University Press. doi: 10.1093/ce/zkad015

 

  1. Park CY, Kim K, Helble M, Roth S. Getting Ready for the COVID-19 Vaccine Rollout. Manila, Philippines: Asian Development Bank; 2021. doi: 10.22617/BRF210071-2

 

  1. Riffat J, Kutlu C, Brito ET, Su Y, Riffat S. Performance analysis of a PV powered variable speed dc fridge integrated with PCM for weak/off-grid setting areas. Fut Cities Environ. 2021;7:6. doi: 10.5334/fce.121

 

  1. Riffat J, Kutlu C, Tapia-Brito E, et al. Development and testing of a PCM enhanced domestic refrigerator with use of miniature DC compressor for weak/off grid locations. Int J Green Energy. 2022;19:1118-1131. doi: 10.1080/15435075.2021.1984244

 

  1. Yusof YWM, Kassim M, Wan Shuhaimi WAA. Design and Analysis of Portable Solar Powered Refrigerator Unit’. In: 4th IEEE International Conference on Artificial Intelligence in Engineering and Technology, IICAIET; 2022. doi: 10.1109/IICAIET55139.2022.9936824

 

  1. Abuelnour MA, Abuelnuor AAA, El-Kawi OSA. Design and analysis of a solar-powered refrigeration system with thermal energy storage for efficient storage of scorpion antivenom. Energy Storage. 2024;6:e622. doi: 10.1002/est2.622

 

  1. Elarem R, Mellouli S, Abhilash E, Jemni A. Performance analysis of a household refrigerator integrating a PCM heat exchanger. Appl Therm Eng. 2017;125:1320-1333. doi: 10.1016/j.applthermaleng.2017.07.113

 

  1. Karthikeyan A, Aakhash Sivan V, Maher Khaliq A, Anderson A. Performance improvement of vapour compression refrigeration system using different phase changing materials. Mater Today Proc. 2021;44:3540-3543. doi: 10.1016/j.matpr.2020.09.296

 

  1. Deshmukh MS, Deshmukh DS, Chavhan SP. A critical assessment of the implementation of phase change materials in the VCC of refrigerator. J Thermal Eng. 2022;8:562-572. doi: 10.18186/thermal.1149392

 

  1. Berdja M, Hamid A, Sari O. Characteristics and thickness effect of phase change material and frost on heat transfer and thermal performance of conventional refrigerator: Theoretical and experimental investigation. Int J Refrigerat. 2019;97:108-23. doi: 10.1016/j.ijrefrig.2018.10.003

 

  1. Cofré-Toledo J, Vasco DA, Isaza-Roldán CA, Tangarife JA. Evaluation of an integrated household refrigerator evaporator with two eutectic phase-change materials. Int J Refrigerat. 2018;93:29-37. doi: 10.1016/j.ijrefrig.2018.06.003

 

  1. Mastani Joybari M, Haghighat F, Moffat J, Sra P. Heat and cold storage using phase change materials in domestic refrigeration systems: The state-of-the-art review. Energy Build. 2015;106:111-124. doi: 10.1016/j.enbuild.2015.06.016

 

  1. Liu G, Li Q, Wu J, et al. ‘Improving system performance of the refrigeration unit using phase change material (PCM) for transport refrigerated vehicles: An experimental investigation in South China. J Energy Storage. 2022;51:104435. doi: 10.1016/j.est.2022.104435

 

  1. Pahamli Y, Valipour MS. Application of phase change materials in refrigerator and freezer appliances: A comprehensive review. J Heat Mass Transfer Res. 2021;8:87-104. doi: 10.22075/JHMTR.2021.21860.1316

 

  1. Liu Z, Zhao D, Wang Q, Chi Y, Zhang L. Performance study on air-cooled household refrigerator with cold storage phase change materials. Int J Refrigerat. 2017;79:130-142. doi: 10.1016/j.ijrefrig.2017.04.009

 

  1. Purohit N, Dasgupta MS. Thermal storage material enhanced refrigerated display cabinet. Mater Today Proc. 2019;28:510-514. doi: 10.1016/j.matpr.2019.12.210

 

  1. PCM Products Ltd. Eutectic Catalogue 2011. Cambridgeshire, United Kingdom: PCM Products Ltd.; 2011. Available: https://www.pcmproducts.net [Last accessed on 2024 Nov 01].

 

  1. UK Government. Section 3: CCP Records, Health and Safety Executive; 2018. Available from: https://assets.publishing. service.gov.uk/media/5aec3202ed915d42f42b6286/hs_10.2.1_ section_3_ccp_records.pdf [Last accessed on 2025 Jan 07].

 

  1. Mir S, Stevens R, Missen L, Okoloekwe A. Standard Operating Procedure: Fridge and Clinical Room Temperature Monitoring for Safe Storage of Medicine, Version 4. Senior Pharmacy Manager’s Group; 2015. Available from: https://www.elft. nhs.uk/sites/default/files/2024-09/sop_fridge_and_clinical_room_temperature_monitoring_ for_safe_storage_of_medicine_6.0.docx [Last accessed on 2025 Jan 07].

 

  1. Jarimi H, Zheng T, Zhang Y, et al. Solar photovoltaic-assisted DC vapour compression with a low-cost ice gel thermal battery for off-grid building cooling. J Build Eng. 2024;91:109350. doi: 10.1016/j.jobe.2024.109350

 

Share
Back to top
Green Technology & Innovation, Published by AccScience Publishing
We use cookies on our website to ensure you get the best experience.
Read more about our cookies here
Accept