AccScience Publishing / AJWEP / Volume 20 / Issue 5 / DOI: 10.3233/AJW230067
RESEARCH ARTICLE

Decarbonising of the Indian Cement Industry Through Alternative Fuels – Challenge of Transfer Chute Jamming

Kapil Kukreja1,2* Manoj Kumar Soni2 Bibekananda Mohapatra1 M.V. Ramachandra Rao1
Show Less
1 National Council for Cement and Building Materials (NCB), Ballabgarh Haryana, India
2 Birla Institute of Technology & Science, Pilani Fossil Rajasthan, India
AJWEP 2023, 20(5), 71–77; https://doi.org/10.3233/AJW230067
Submitted: 28 July 2022 | Revised: 22 March 2023 | Accepted: 22 March 2023 | Published: 9 October 2023
© 2023 by the Author(s). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution -Noncommercial 4.0 International License (CC-by the license) ( https://creativecommons.org/licenses/by-nc/4.0/ )
Abstract

The Indian cement industry in COP27 highlighted its commitment to achieving net zero CO2 emission by 2070 made during COP26. The industry is moving towards decarbonisation and has identified various levers to achieve the goal. Fossil fuel replacement by Alternative Fuels (AFs) has been identified as one of the levers. Refused Derived Fuel (RDF), surplus biomass, industrial waste, and other societal wastes, etc., have emerged as potential AFs; however, their use comes with technical challenges like transfer chute jamming due to the wide range of variations in their properties. Jammed transfer chute leads to the breakdown of the entire transportation system and further fluctuation in AFs feeding to the kiln/calciner. Fluctuation in the feed rate of the AFs disturbs the fuel mix ratio (mix ratio of fossil fuel and AFs) and ultimately negatively impacts the process, operation, and quality of the produced cement. Transfer chute design is often overlooked, leading to build-up, blockage, and wear in chutes. Designing of transfer chute is more challenging when handling solid alternative fuels in cement plants, as the properties of these fuels have a wide range of variation where moisture may be as high up to 40%, bulk density may vary from 0.1 to 0.75 tonnes/m3, and particle size ranges from 1 to 100 mm, etc. This study covers a survey to establish which types of AFs, and their characteristics contribute to the chute jamming problem. The outcome of this study shall help the Indian cement industry to consider the appropriate inputs for transfer chute design and selection of the correct alternative fuels and their mix to avoid chute jamming.

Keywords
Alternative fuels
cement plant
chute jamming
thermal substitution rate
References

Bose, A.S.C. (2019). Pharmaceutical Industry Waste As Alternative Fuels The India Cements Limited Experience. In: CMA CONSERVE, Green and Sustainable Resources, September 30 – October 1. New Delhi, pp. 47-50.

Confederation of Indian Industry (2006). Manual on Best Practices in Indian & International Cement Plants. URL http://www.greenbusinesscentre.com/site/ciigbc/gbcd/ Manual on best practices in Indian and intl cement plants- Final.pdf (accessed 4.24.20).

Confederation of Indian Industry (2011). Case Study Manual on Alternative Fuels & Raw Materials Utilization Indian Cement Industry. URL https://shaktifoundation.in/ wp-content/uploads/2017/06/afr-utilisation-in-cement- industry-final-10-jan-2012.pdf (accessed 4.24.20).

Deolalkar, S.P. (2016). Designing Green Cement Plants, Designing Green Cement Plants. BS Publications India. https://doi.org/10.1016/c2014-0-00783-6

Fincham, J.E. (2008). Response rates and responsiveness for surveys, standards, and the Journal. Am J Pharm Educ, 72:43. https://doi.org/10.5688/aj720243.

Ilic, D. (2020). Transfer Chute Design : Paradoxes and Paradigms (White Paper). Rocky DEM, ESSS pp. 1-12.

Indian Cement Industry on track to meet 2030 carbon emissions intensity-reduction objectives (2018). World Bus. Counc. Sustain. Dev. URL https://www.wbcsd.org/ Sector-Projects/Cement-Sustainability-Initiative/News/ Indian-cement-industry-on-track-to-meet-2030-carbon- emissions-intensity-reduction-objectives (accessed 1.29.22).

Kukreja, K., Anupam, Sharma, P. and S. Bhatnagar (2019). Handling of Multi Type Alternative Fuel: Challenge and Opportunity for Cement Plant. In: 16th NCB International Seminar on Cement, Concrete and Building Materials. National Council for Cement and Building Materials, p. 27.

Kukreja, K., Kumar, M., Nainegali, M.S. and B. Mohapatra (2022). Development of transfer chute design through discrete element modelling for using refused derived fuel in Indian cement plants. Sustain Energy Technol Assessments, 53: 102567. https://doi.org/10.1016/j. seta.2022.102567.

Kukreja, K., Mohapatra, B.N. and A. Saxena (2019). Transfer chute design for solid alternative fuels. In: 16th NCB International Seminar on Cement. Concrete and building materials. National Council for Cement and Building Materials, p. 27.

Kukreja, K., Sharma, P., Mohapatra, B.N. and A. Saxena (2020). Indian Cement Industry: A Key Player in theCircular Economy of India. In: Sangwan, K., Herrmann, C. (eds), Enhancing Future Skills and Entrepreneurship. Sustainable Production, Life Cycle Engineering and Management. Springer, Cham. https://doi.org/10.1007/978- 3-030-44248-4_18

Kumar, K., Satija, D. and A. Gupta (2014). Improving Thermal Substitution by using alternative fuels in the Indian Cement Industry. URL http://www.holtecnet.com/ holtecdocs/TechnicalPapers/p_2014_3.pdf (accessed 8.20.20).

Ministry of Housing and Urban Affairs (Government of India) (2018). Guidelines on Usage of Refuse Derived Fuel in Various Industries.

Modi’s COP26 speech: ‘A declaration that India will do things differently’ (2021). Economic Times. URL https:// economictimes.indiatimes.com/news/international/ world-news/modis-cop26-speech-a-declaration-that- india-will-do-things-differently/articleshow/87690172. cms?from=mdr (accessed 1.1.22).

Mohapatra, B.N., Chaturvedi, S.K., Saxena, A, Sharma, P., Bohra, A. and G.J. Naidu (2019). Use of Alternative Fuels and Raw Materials in Cement Industry in India – Prospects & challenges. In: CMA CONSERVE , Green and Sustainable Resources, September 30 – October 1, 2019 New Delhi. pp. 63-75.

Mohapatra, B.N. (2021). Decarbonisation of The Indian Cement Industry. Indian Cem. Rev. JRC Technical Report. pp. 46-48.

Mohapatra, D.B.N. (2022). Utilization of alternative fuels and raw materials in Indian cement Industry: The Current Scenario and future Prospects. Indian Cem. Rev., pp. 58-61.

Saha, P.K. and K.H. Karstensen (2017). Co-processing of Alternative Fuels & Resources in Indian Cement Industry Baseline and Potential. In: Global Waste Management. pp. 458-466.

Schenck Process Europe GmbH (SPEG) (2016). Pneumatic Conveying of Alternative Fuels An Experience Report – From the Industry for the Industry. URL https://www. schenckprocess.com/data/en/files/632/bva1056en.pdf (accessed 8.10.21).

Ultratech Cement Limited Limited (2015). Vikram Cement Works “ Bureau of Energy Efficiency” Knowledge Exchange Platform. URL http://knowledgeplatform.in/ wp-content/uploads/2015/09/Best-Practices-adopted-by- Vikram-Cement-Works.pdf (accessed 7.5.20).

World Business Council for Sustainable Development(WBCSD) – Cement Sustainability Initiative (CSI) (2018). Technology roadmap for cement. World Bus. Counc. Sustain. Dev. URL https://www.wbcsd.org/contentwbc/ download/4586/61682/1

Share
Back to top
Asian Journal of Water, Environment and Pollution, Electronic ISSN: 1875-8568 Print ISSN: 0972-9860, Published by AccScience Publishing