Analysing the Composition and Behaviour of Manufacturing Industry Effluents
This study aims to find a suitable adsorbent for reducing the chemical content, specifically heavy metals like cadmium, in industrial effluent post-treatment. The project involves the identification and preparation of adsorbents, testing their efficacy through trial-and-error methods, and comparing results with and without the adsorbent. Orange peel and Delonix regia seeds were chosen as potential adsorbents. After preparation and activation, the adsorbents were tested with cadmium nitrate solutions, and their effectiveness was evaluated using UV spectrophotometer. The results indicate promising potential for both non-activated and activated adsorbents in reducing cadmium concentrations, laying the groundwork for further research into industrial wastewater treatment methods.
This study offers a significant resource for policymakers, industry professionals, and environmentalists by offering a comprehensive view of the effluents of the manufacturing industry. It serves as a catalyst for sustainable industrial practices and the preservation of natural ecosystems.
Ahmad, T. (2019). Treatment and utilization of dairy industrial waste: A review. Trends in Food Science & Technology, 88: 361-372.
Barakat, M.A. (2011). New trends in removing heavy metals from industrial wastewater. Arabian Journal of Chemistry, 4(4): 361-377.
Borea, L. et al. (2018). Wastewater treatment by membrane ultrafiltration enhanced with ultrasound: Effect of membrane flux and ultrasonic frequency. Ultrasonics, 83: 42-47.
Cadet, C. (2007). Papermill wastewater treatment: model design and validation on pilot plant. Ifac Proceedings Volumes, 40(4): 387-392.
Chowdhury, M., Mostafa, M.G., Biswas, T.K. and A.K. Saha (2013). Treatment of leather industrial effluents by filtration and coagulation processes. Water Resources and Industry, 3: 11-22.
Ciputra, S. (2010). Comparison of treatment options for removal of recalcitrant dissolved organic matter from paper mill effluent. Chemosphere, 81(1): 86-91.
Dadrasnia, A., Usman, M., Kang, T., Velappan, R., Shahsavari, N., Vejan, P., Mahmud, A. and S. Ismail (2017). Microbial aspects in wastewater treatment – A technical review. Environmental Technology, 2(2): 75-84.
Ge, Q. (2013). Draw solutions for forward osmosis processes: Developments, challenges, and prospects for the future. Journal of Membrane Science, 442: 225-237.
Govindaraj, V., Murugan, K., Sathaiya, J. and P. Baskar (2023). Carbon capture and storage with ionic liquids: industrial flue gas trapping in calcination process. Asian Journal of Water, Environment and Pollution, 20(2): 85-91.
Govindaraj, V., Thirumalasamy, S., Sankar, J.I. and S. Gopi (2022). Groundwater potential mapping and natural remediation through artificial recharge structures in Vellore District, Tamil Nadu, India using geospatial techniques. Desalination and Water Treatment, 254: 229-237.
Govindaraj, V., Manokaran, K., Sathaiya, J. and P. Baskar (2023). Environmentally-friendly bio-coagulants: A cost-effective solution for groundwater pollution treatment. Asian Journal of Water, Environment and Pollution, 20(3): 19-28.
Govindaraj, V., Sankar, J.I., Gnanamanickkam, J.N.G. and S. Amala (2022). Demarcation of non-carcinogenic risk zones based on the intake of contaminated groundwater in an industrial area of southern India using geospatial techniques. Desalination and Water Treatment, 274: 140-149.
Groves, G.R. et al. (1983). Dynamic membrane ultrafiltration and hyperfiltration for the treatment of industrial effluents for water reuse. Desalination, 47(1-3): 305-312.
Helble, A. (1999). Advanced effluent treatment in the pulp and paper industry with a combined process of ozonation and fixed bed biofilm reactors. Water Science and Technology, 40: 343-350.
Kamali, M. et al. (2019a). Additive and additive-free treatment technologies for pulp and paper mill effluents: Advances, challenges and opportunities. Water Resources and Industry, 21: 100109.
Kamali, M. et al. (2019b). Sustainability considerations in membrane-based technologies for industrial effluents treatment. Chemical Engineering Journal, 368: 474-494.
Kamali, M. and Z. Khodaparast (2015). Review on recent developments on pulp and paper mill wastewater treatment. Ecotoxicology and Environmental Safety, 114: 326-342.
Manoharan, K., Manimaran, G. and S.R. Yerra (2023). Effective removal of heavy metal: mercury concentration using natural adsorbents. Environment, Development and Sustainability, 25(6): 5737-5752.
de la Luz-Pedro, A. (2019). Pollutant removal from wastewater at different stages of the tanning process by electrocoagulation. Chemistry, 2019: 8162931.
Thompson, G. (2001). The treatment of pulp and paper mill effluent: A review. Bioresource Technology, 77(3): 275-286.