Chemical Composition of Different Brands of Bottled Drinking Water Sold in Oman as Labelled by Manufacturers
Information about the safety of bottled drinking water in Oman is lacking. Therefore, we aimed to compare the chemical composition (as labelled by manufacturers) of 17 local and imported brands of bottled drinking water sold in Oman, and compare them with WHO and USEPA standards. Seventeen brands of bottled drinking water were purchased from local stores in Muscat, Oman. The chemical composition of those brands was recorded from the labels, and compared with WHO and USEPA standards. The results showed that the pH of the bottled water of all the brands was within the normal range prescribed by both WHO and USEPA. Total dissolved solids, hardness, sodium, chloride and nitrate were less than the primary or secondary (aesthetic) maximum limits set by WHO and/or USEPA. Fluoride levels were not reported in 53% of the brands and were less than recommended limits in the remaining brands. Further studies are warranted to analyze water samples of those brands and compare them with the labels.
Bityukova, L. and V. Petersell (2010). Chemical composition of bottled mineral waters in Estonia. Journal of Geochemical Exploration, 107(3), 238-244.
Chiarenzelli, J. and C. Pominville (2008). Bottled water selection and health considerations from multi-element analysis of products sold in New York State. Journal of Water and Health, 6(4), 505-512.
Elobeid, M., Almarhoon, Z., Virk, P., Hassan, Z., Omer, S., El Amin, M., Daghestani, M. and E. Al Olayan (2012). Bisphenol A detection in various brands of drinking bottled water in Riyadh, Saudi Arabia using gas chromatography/mass spectrometry. Tropical Journal of Pharmaceutical Research, 13(3), 455-459.
Gangil, R., Tripathi, R., Patyal, A., Dutta, P. and K. Mathur (2012). Bacteriological evaluation of packaged bottled water sold at Jaipur city and its public health significance. Vet World, 5(12), 27-30.
Garzon, P. and M. Eisenberg (1998). Variation in the mineral content of commercially available bottled waters: Implications for health and disease. The American Journal of Medicine, 105(2), 125-130.
Gleick, P., Allen, L., Christian-Smith, J., Cohen, M., Cooley, H., Heberger, M., Morrison, J., Palaniappan, M. and P. Schulte (2012). The world’s water. Volume 7. 2nd ed. Island Press, Washington, DC.
Ikem, A., Odueyungbo, S., Egiebor, N. and K. Nyavor (2002). Chemical quality of bottled waters from three cities in eastern Alabama. Science of the Total Environment, 285(1-3), 165-175.
Johnson, S. and C. DeBiase (2003). Concentration levels of fluoride in bottled drinking water. Journal of Dental Hygiene, 77(3), 161-167.
Mahajan, R., Walia, T., Lark, B. and Sumanjit (2006). Analysis of physical and chemical parameters of bottled drinking water. International Journal of Environmental Health Research, 16(2), 89-98.
Maraver, F., Vitoria, I., Ferreira-Pêgo, C., Armijo, F. and J. Salas-Salvadó (2015). Magnesium in tap and bottled mineral water in Spain and its contribution to nutritional recommendations. Nutr Hosp., 31(5), 2297-2312.
Moazeni, M., Atefi, M., Ebrahimi, A., Razmjoo, P. and M. Vahid Dastjerdi (2013). Evaluation of chemical and microbiological quality in 21 brands of Iranian bottled drinking waters in 2012: A comparison study on label and real contents. Journal of Environmental and Public Health, 2013, 469590. doi: 10.1155/2013/469590.
Momani, A.K. (2006). Chemical assessment of bottled drinking waters by IC, GC, and ICP-MS. Instrumentation Science & Technology, 34(5), 587-605.
Nsanze, H., Babarinde, Z. and H. Alkohaly (1999). Microbiological quality of bottled drinking water in the UAE and the effect of storage at different temperatures. Environment International, 25(1), 53-57.
World Health Organization (WHO) (2011). Guidelines for Drinking-water Quality. World Health Organization, Geneva.
Rabee, A., Emran, F., Hassoon, H. and A. Al-Dhamin (2012). Evaluation of the physico-chemical properties and microbiological content of some brands of bottled water in Baghdad, Iraq. Society of Education, India, 3(4), 109-115.
Rondeau, V., Jacqmin-Gadda, H., Commenges, D., Helmer, C. and J. Dartigues (2008). Aluminum and silica in drinking water and the risk of Alzheimer’s disease or cognitive decline: Findings from 15-year follow-up of the PAQUID cohort. American Journal of Epidemiology, 169(4), 489-496.
Saleh, M., Abdel-Rahman, F., Woodard, B., Clark, S., Wallace, C., Aboaba, A., Zhang, W. and J. Nance (2008). Chemical, microbial and physical evaluation of commercial bottled waters in greater Houston area of Texas. Journal of Environmental Science and Health, Part A, 43(4), 335-347.
Steinmetz, J., Martinez-Mier, E., Jones, J., Sanders, B., Weddell, J., Soto-Rojas, A., Tomlin, A. and G. Eckert (2011). Fluoride content of water used to reconstitute infant formula. Clinical Pediatrics, 50(2), 100-105.
Varrica, D., Tamburo, E. and G. Dongarrà (2013). Sicilian bottled natural waters: Major and trace inorganic components. Applied Geochemistry, 34, 102-113.
Vom Saal, F. and J. Myers (2008). Bisphenol A and risk of metabolic disorders. JAMA, 300(11), 1353-1355.
US Environmental Protection Agency (2015). Drinking Water Contaminants. http://water.epa.gov/drink/contaminants/ index.cfm#one (Accessed 14 Aug. 2015).
Yekdeli Kermanshahi, K., Tabaraki, R., Karimi, H., Nikorazm, M. and S. Abbasi (2010). Classification of Iranian bottled waters as indicated by manufacturer’s labellings. Food Chemistry, 120(4): 1218-1223.